Quotation: I did my work once and according to the known symptoms” After starting the ABS light does not go out and lights and turn signals do not work”, the expansion of the contact plate from the ignition lock tried and documented photographically.For all those interested: 1) Decomposition of the steering column panel (2-part) Photo 1 + 2 the two parts of the steering column panel are screwed with 4 screws, 2 x 25 he Torx (the two round holes) and 2 x 15 he Torx (the two 4-e After screwing the two halves apart and finished. 2) On the left side of the steering wheel, pull off the ignition lock opposite the black 8-pin plug (photo 3). 3) The contact plate is screwed with 2 normal slot screws (photo 4) and can be easily removed after screwing off (photo 5) 4) The culprit can be disposed of (photo 6) 4) The assembly takes place in reverse order when the ignition key is removed. Greetings and lots of fun while crafting burfil