Good evening for the first time… I drive a Mazda 626 GW built in 1998 and have been having a problem blocking my brake at the rear left for about 2 weeks. The brake disc gets hot and it smells like it’s already slightly burned. I noticed that the problem occurs as soon as I use the hand brake. I dismantled the brake system and when the brake rope is hung, I noticed that the saddle is not completely back but is slightly tightened and can be pushed back by hand about 1 cm. When I press the handbrake as long as the car is mounted, the caliper always goes back. However, I can turn the tires with a bit of hard work with the fully tightened brake. As soon as I mount the tire, drive off and then press the handbrake you will hang again. Let me leave the handbrake in peace everything is OK. The right side Since e is OK there blocks nothing and the tire I can not turn even with the greatest effort. Oh yes the caliper I had changed already 2 years ago but against used by verwerter (then the problem was that I had no handbrake effect). Unfortunately I always have the habit of pulling the handbrake when I park, so I certainly have to solve the brake three times by hand in the last 2 weeks. What do you mean what can that be? I suspect Br emssattel or brake rope. Ask for your help, thank you.