Hello dear Phaeton enthusiast! I am proud owner of a 2005 Phaeton V10, which I bought about 2 months ago with 250tkm and since then also more than a thousand km. Driving on long distance is really a pleasure. I bought and built in a new comfort battery a few days after the purchase, because the old deep discharge was and with 3.5V measured voltage was no longer kissed by the charger when driving… Then some things worked, which were previously out of operation (e.g. the el. boot flap). Now I have the problem that I have to have a quiet consumer, so that the comfort battery is flat after 2 days without running engine and the car can only start via the emergency start (key left right turn) . I first started to read here in the forum, because there are some threads exactly on this topic. I then started to pull the fuses of the whole additional consumers gradually to so Unfortunately, so far I have not been successful. I am in the process both at the safety box under the steering wheel, as well as at the box directly at the comfort battery to walk. Is there a third safety box? In the appendix there are two pictures of the safety covers and red circled, which fuses I had pulled so far all (coated consumers are blank fuses, so optional equipment that my Phaeton does not have). About tips, suggestion, hinwe ise what I could still try, I would be very grateful to you. All too often the new AGM battery will not want to participate in the fun…