Hi, everybody. Unfortunately, I had a little accident at the car parking on the weekend. I came to another parking car despite parking sensors. They reacted strangely only when I was already on the car. Well, no matter… No one did what happened, my bumper only has a few scratches, but a parking sensor is pressed in. That is, it is no longer in the intended bore. I can still reach it, however, due to the “lack of space” logically but If someone has an idea how to get it back in position without driving into the workshop, where the whole bumper is dismantled? I already have an idea, since I don’t know how much space behind the bumper is, I can’t tell if it works. Maybe one of you can. I imagine that I’m going to drive one side on the curb and then put the jack on the back and curl up all the way up. Then enough plate should not be fixed again (from the outside). I can grab under the bumper and push the sensor back into the hole from the inside. Can this work, or is there so little space that I can’t get there with my hand? Unless that works: Does anyone have another idea how to get the sensor – which, in my opinion, still works – back to its original position without having the bumper dismantled? Thank you very much for your help! PS.: The white track I can’t see any more, so I can live with the scratches for the time being.