Hello, I now want to upgrade the electr.FH. For the conversion I got cheap original EFH and switch. Unfortunately my MK7 BJ96 1.8l GAL did not have the “big” wire harness in it, ie. the cables for the EFH are not available. After a little google ́n I came across the following result. Switch layout: Pin1 – EFH Motor Pin2 – Ignition plus Pin3 – Mass Pin4 – Mass Lighting Pin5 – Instrument lighting + Pin6 – Mass Pin7 – EFH Motor So now my questions 1: Kan I don’t know what kind of currents there are in the electrical system. I don’t have too much pleasure that will burn the car under full load (radio on, electr.FH on) because of the overload and burn the car off. 3:With Pin1 and Pin7 I go directly to the connections of the engine or? I read in a different thread. 3:With Pin1 and Pin7 I go directly to the connections of the engine or? , that from the MK7 no relays for the electr. FH were installed more? For better suggestions I always have an open ear. Thanks already for reading and for the helpful answers. Wish all still a nice, long Pentecost weekend