Hello together! I need a few tips for installing a complete ignition system. My stationary 2L ohc was originally equipped with a reverberator. Since I didn’t know how to connect this ignition, I went there for a short time and installed an older distributor with interrupter contact. So far this worked reasonably satisfactory. But now I’m bothered by the constant adjustment and control of the contacts and now I’m the ignition I don’t know how. I have the following cable colors of the ignition with reverberator: 1)Distributor: Black Brown Black/Red 2) Ignition coil: Blue/Brown Red 2 * Green Blue/Yellow And the black one that brings the coil voltage 3) ECU: Brown Green Black/Red Blue/Red Blue/Yellow Super would be if someone could write me in detail which colors are for what; e.g. distributor black = continuous plus of ignition lock or so similar… Thank you in advance Greeting…