Hello, I (or an acquaintance) have installed in my S2 a 3 spokes airbag steering wheel from the S3. As far as so good. Now everything is together again. Unfortunately, the steering wheel or the whole steering column is now shaking upwards, below and to the side. Also the ignition lock and the steering pole switches (always all hang together) wobble. I pull the steering wheel to me “rash” it in and don’t shake until I push it back towards the engine compartment. The whole thing is since my well-known the adapter ring for s The steering wheel has knocked on the steering column and the steering column has slipped towards the engine. Is the steering column screwed somewhere or is there a bracket into which the column should be snapped?