Hello municipality, I am a proud owner of a Lupo 1.4 GT :-)! I changed the clutch and the gearbox about 1 week ago, because the gearbox broke. I removed the throttle flap, as well as the wiring to get the transmission out better. The installation worked perfectly, also connected the plugs (which can not be connected almost wrongly.). Now I wanted to start it and have the following problem. The engine goes on, turns up to 2500 after starting up, and goes out directly again. It runs about 1-2 seconds. I have to mention the following parts have already been renewed at the Lupo. – Ignition coil – Ignition cord – Ignition plugs – throttle flap cleaned and re-learned I am convinced that the wiring or the cable tree was also properly connected. The vehicle was also read out, and no error shows. I have the feeling that the vehicle has lost the coding of the keys. However, the WFS doesn’t glow, or Blinks also not. The battery was stuck about 2-3 weeks ago. I hope you can help me.