Hello Elch municipality. Today I have overcome the clutch pedal and the encoder cylinder to expand and check. I ordered in advance the 2 sockets of plastic to have them at hand at the reperature. The only bad thing about the action is the bolt that fixes the pedal. This was plugged in with me from the brake pedal. It can only be pulled out/fumbled if you release the pedal holder to turn it a little bit. Then the bolt goes out. When assembled I put it on the other side. ..On the encoder cylinder only 2 nuts must be removed from the two wires. and of course the bolt must be removed from the pedal. Encoder cylinder disassembled and cleaned. Stottle holder greased on the piston. Sockets on the pedal bolt changed. All mechanical connections greased. Clutch vented. Tool: 11 muzzles,13er,15er,17er, side cutter, brake cleaner. Some fat, about 1/2 litre brake fluid. . Time about 2h. Result : Super soft and troubleless coupling.