I don’t know what to do anymore. the error memory only has a message from the abs sensor at the front left or right, otherwise it is empty. the ignition plugs, whether I take new or old, reach after the start attempt well after sprit. so sprit it seems to get. i tried two other ignition coils already. divisor cap and finger are new. cable to the control unit from the ignition coil, cam and crank-if sensors are measured through, all ok. other still wave sensor are installed. other control unit (that for the ignition system) tested. and everything without success. he doesn’t go on and has no spark. as he does not care at the beginning I have at cylinder one more guckz above he has a spark, since he still had one, at two to five he had no more, and then I didn’t have a spark.