Hello, I recently bought a used XC60 with a built-in 360° camera. Now I have a question about the rear camera. I often get the car with the four camera symbols when inserting R and then I select the camera at the rear accordingly. I get a split screen from camera view (to the rear) at the bottom of the screen and in the upper part of the screen the car is shown with the distance sensors. But now it happened from time to time that I also got the rear camera in full screen mode directly when driving back. And I have not yet understood or can find out how I can adjust this or influence it. I also did not find a corresponding hint in the operating instructions or in the forum. The entire software levels of the car should actually be up to date. I would have liked to have the back camera in full screen mode as a standard setting when inserting R and if necessary I would switch to the 360 degree camera. The distance warnings for the rear are also displayed as a beam in the camera view. So I don’t need the split screen in this case somehow for your help.