Hello, we’ve been having a problem with our Smart for a long time. Nothing could be found in a free workshop in the error memory. So to the problem. In the morning off into the Smart, everything starts normally. If you then stop after a few minutes drive, turn off the car (to the baker goes less than 10min ) and again to the Smart it doesn’t start. However, you can clearly hear that he tries to start turning the key for 1/2 second. After that, when the key is turned over again, no more starter comes up. So no starter spins. Then you wait 10min+ about again. Yesterday evening, however, on the parking lot at ikea he didn’t jump anymore even after 20min. Then he tried to start the battery jammed down 10min waiting to start again, no muks again! And 3 strokes in the display. So with ignition then inserted R, then switched to 1 and 2 and then on A and then the 3 strokes disappeared and the car started directly. But he never showed up the three strokes before. So the 3 strokes a fault from the gear/connector starts. And then there was no problem.