Moin, as the title already says, the scooter does not start. I checked: – battery fully charged – carburetor in general removed, disassembled, cleaned – suction as far as possible – fuel also comes – the engine is just missing the last bit until it starts Hab the spark plug out, held on mass, no spark -> New candle ordered, still no spark. I then saw that the cable from coil to spark plug was a little “comforted”, probably against some hot ßes component came, but as far as possible for safety orders new coil and cables. Still no spark of ignition. At the pins of the ignition coil I measure 5V, is the value i.o. or too little ? I am grateful for every tip Alessandro