Hello together, I have a Ford transit that was converted by me to WoMo, but this only on the edge. I had a little over a year ago when the driveline lamp was installed and the MKL reported a new DPF. After now 20TKM (all long distance 5x Sweden in 2024) both reported again. Read me forscan returned P242F as well as P2463. A static regeneration was not possible. Much then with Forscan on which the AGR valve does not work and is always 100% open. o I have now renewed the AGR valve and the DPF. About Forscan DPF learned values back law. PCM restarted error memory deleted. After 500 KM (once a week 140KM back and forth highway) the same game started on the way home emergency run and the same error codes. I put everything back to it again after which the transit for approx. 3KM Prima drives and then everything is set again. I then assumed a defective differential pressure sensor but this is now he A static regeneration is not allowed because a fault is set and if I reset everything and then run it runs about 7min then the errors are set again and the regeneration is stopped. I can also unfortunately not read out any DPF live data with FORScan because the PIDs are not available. What do I do wrong? I hope someone can help me here and am grateful for every tip. Greeting Joe