Hi, I recently bought the phase Linear Audiophile Six. As you can see here, there should be 4 switches. I approached the seller before buying it and he said he only bought the system with 2 switches. I thought that maybe it was distributed earlier (since the system is already 3 years old) and bought it. But now I noticed that the high tone ALWAYS runs full range! I.e. if I set the low pass at the level, then I also hear the melody that the sub would play … and that from the tweeter This of course severely restricts the maximum level and the compo would be a tot sin. When I look at it more closely, I noticed that I have exactly the midrange softness from the picture in the link. And this is ONLY the one. Besides, the TMT whites have so many connections! Looks like this: [Out]: TW- TW+ WO- WO+ Free [In]: – HP+ + Now I have thought that I can use my active softness in a sinister way e. I then wanted to run the HT over the Axton C502 at 2x60W and the TMTs at the Audison SrX 4 at 2x160W. Does that make sense? Can that sound good? Always who njemand actively separates he has also installed an equalizer. Does actively disconnect without EQ and so on make sense? 2. Possibility would be to re-create the HT-wives. But I would need the schematic. Can someone please help me? That would save my day Oh maybe someone also has the manual of the composition, which would help me. Re also great! Achja 3. It would be possible for me to take the high tone branch of my current Rainbow SLX system. But it probably is not a good solution.