Good afternoon. I have a quad of the brand Kymco MXU 250. Currently I have the following problem , I start the quad – everything good Tacho goes on and drives up his system Now I pull brake and press the E starter – you hear a very quiet crack (or so) and everything goes out From this point on nothing goes. Tacho is off and even turn the ignition key and restart brings nothing anymore… No life sign on the tacho and also not by E starter. From this point I get only with When you try the quad with the cable pull, you can see that the speedometer is very short but it starts immediately again. Usually, the quad starts pulling after 3-4 times. When it starts I see from the clock that the current was completely gone or something. So the system is always on 00:00 . What can be? Battery is 12.9 volts. I have completely renewed ignition lock. Starter? But against that speaks that the current is completely gone. Maybe someone has an idea or solution away ? top. Yours sincerely