Hello, have built an RS 2000 engine into my Super Seven. To have 184 hp. My Seven weighs just under 500 kg, so that we then come to 2.72 kg/hp. So it should go helllike – so below 4.5 sec. to 100. On the first ride I was then greatly disappointed. He felt 100 hp too little. Guess he has about 70-80 hp max. 184 hp in the Seven at 500 kg – there must be a run through the frame – that must go off like the post office, but not like that. He does very well. He turns around. t also evenly high up to the speed limiter. However, he still has no power. What can I do? Today I disconnected the battery, solved the plug on the control unit and clamped both again. Supposedly, the control unit should learn again. Unfortunately, I came into the rain. Was not so cool without cover and without glasses with short disc.;-))) The error codes with the diode showed nothing special. (additional air module and activated carbon magnetic switch – both nic Now I have heard that there should be another list of error codes that can be used when the engine is running. Is that true that there is something like this, or does someone have these additional error codes and can make them available to me? Oh, I have tried the following: Strip off map sensor: Engine goes off. Keeping cold air controllers: Engine runs like sack of nuts. Who has an idea what that could be? Greetings, Wolli