Hello Saab friends, today I was on my way as I drove towards a junction, whose traffic light turned yellow when I was still quite far away. So I braked and flashed the opposite left turner so that they knew that I was stopping. After I drove and looked again at the fittings, I noticed that the main-beam lamp was shining. I thought I once again pulled too hard on the lever (no great art at the labber parts) and wanted to get the distance by pulling again On the way there I tried whether the main light went out when I switched on the light switch on the stand light or completely switched on (day running light is activated with safety number 15), nothing happened. At the position “stand light” the dipped light went out but the main light remained on. Even when I turned off my Saab at the gas station, pulled off the key and locked it, the main light remained on. I had the safety switch off, nothing happened. No. 15 pulled off, which did not help and then the fuse No. 27 (Fernlicht & ACC); when this was pulled off neither dipped- or main-beam went. When I put it back in again, the main-beam was also on again. Only after I had removed the relay No. B in the electric center at the front of the engine compartment and then activated the ignition and deactivated again and the relay again inserted, the main-beam was off. I then switched on the main-beam again for the test and it let itself be Then I repeated the procedure with the relay and it was out again. Now I’m driving without high-light and light horn but in the long run this is annoying, especially with long road nets in the dark. Who knows how to fix this problem and what it is about? Thanks & Greeting, Henning