good tomorrow forumler, I have a question which refers to the increase in performance at my GSi. The machine is the c20ne and I have the following plans, as I get to the parts well for me: – RAM Induction – Fan Curvature – Group A (with absorber technology) – Power tube (instead of hose) I now went out to take the approx. values and counted from machine down to ESD (I also don’t know if you can do it that way) 85kw + 5kw (Ram) 90kw + 6kw (7% by fan k) 96kw + 6kw (7% by group) that would be under best conditions, purely computational, around the 102kw, which would then be available to me almost at the acceleration. In case that I would set the 130 chip pure, would the values according to my understanding almost once increase. 95kw + 6kw (Ram) 101kw + 7kw (7% by fan manifold) 108kw + 7kw (7% by group) about 115kw Or can you not calculate that at all? Finally, the controversial question arises as well. whether you could not tickle out 1 – 2 kw or at least stabilize the performance by means of suction optimization, i.e. the so-called power raw & other self-built, and by inserting 16V valves & tuning of the whole, or even 1 – 2 kw.