Hello first of all I hope here I can finally be helped and I can hopefully explain my problem intelligibly Have already tormented me through several forums and in no one could be really usefully helped me up to now… My problem is the following… My flasher has always flashed only briefly afterwards permanently lit up… when I had examined in the workshop, the Mein Blinker relay was broken… So I got a new one and wanted this also g easy to install… but after I connected the new one went at once nothing more… the relay didn’t attract any more… on the advice of a friend I checked the fuses and had to find out that the flasher fuse was defective… I changed it afterwards and connected the relay again… the result is the same… no blinking… no ticking… I checked again after connecting but the fuse was still good. On my old Relays are the numbers 49, 49a, 31 white also the 49 + is 49a the flasher wire and 31 the mass… however the wire colors are not exactly described… with me there are only 3 wires with the colors red, black and white… on the new relay are not numbers but the letters L, E and B… someone can tell me how to connect the 3 wires with the new or at least the old relay… I hope that was not too much and I hope it was partly understandable… already times vilen thanks for the answers