Hello together! And my power amplifier (Helix Dark Blue2) has not been working for a few days now. I have just looked at the problem. The problem is that my power amplifier does not get a power on the remote/reverse (is that what it means??). I mean the thin cable, which is connected between 12V and mass to the amp from the radio. By chance my amp was working by pressing the 12V power on the connection of the reverse cable at the end of the 12V. My theory is that could I buy a turnout and take the power in directly from the battery? Because in the overturned state, the amp, as before, only went with it when the ignition was switched on. If so, do I have to pay attention to something when I buy a turnout? The line from the battery to the amp has a cross section of 16mm2. Do I get such turnout in any electric shop? Or should I leave my finger on the solution? I would be very grateful for a tip. ar. Greetings AkoN