Hello, I have already searched half the net and was already at an Opel and Renault workshop, here in the vicinity. But no solution. My Vivaro A, 2010, 2.5l, 140000 km, bought in November last year, goes all 3000 km, without notice into the emergency run. I then reset it again until it goes back to the emergency run after 3000 km. As error is then stored oil dilution. I know this from my Trafic. But this had previously displayed the workshop symbol. At 500 or 1000 km overrun (don’t know exactly) he went into the emergency run. Also with oil thinning in error memory. DP is ok. Short distances are not driven either. I drove already 12000 km within the year. When reset appears quite briefly 3000 in the display. I have already found in the DDT a few adjustment fields with some service specifications in the dashboard control unit. Unfortunately very incomprehensible language. Will also destroy nothing. In the Can Clip and in the Renault Dialogys have I could imagine that in the vehicle this 3000 km requirement was deliberately set, because it is a former service vehicle of Thyssen Krupp. With it you can get the employees who lead the vehicle to drive immediately into the workshop. (Is only such an idea) The question is: Is that so and how can I adjust the requirement differently? ? The last 2 times I was just on the highway than that happened. Don’t be annoying if this thing just goes into the emergency run when it overtakes.