Hello together, for some time now I have found that my Peugeot Speedfight 3 is slowly discharging the battery itself. One week of service life and it is not enough to start. Test-wise I have now always pulled the fuse during the last weeks, since then I have no problems and the scooter keeps its battery charge. Even after several weeks it starts completely without problems. Now it is so that the scooter due to its condition, its Al For me it is no more than a cheap means of transport in everyday life. It is also not really spared, and large investments in it should be avoided as much as possible. For everything else I have a car, and that is enough for me. Therefore I don’t want to spend hundreds of euros so that the workshop enters the in this case complex troubleshooting through the many meters of cables, but simply and simply a n Toggle switches at the place where the fuse is. So much for the situation, now my question: – How many A does the switch have to withstand? Is there also the current running directly above which leads to the starter? Because before the fuse the thicker cable already detachs from the batt. because I only need to know this because if the current to the starter through this switch needs something much more massive. The “current eater” is clearly in the area covered by the fuse, which is why a Switch here would be enough.