In the luggage net topic I had already announced that I would like to make side parts for the trunk. Today I started the project once. First I made a template of cardboard and paper, and slowly fastened to the right shape. As material I got an artificial plate from my landlord. With the plates the carport was protected from weather from outside, about 5mm thick, white coated. The exact name just falls to me nic The stencil pattern I then transferred to the plate and sawed out with a jigsaw (metal sheet). Unfortunately my battery screwdriver is in the company, therefore only the holes are missing. As screws I take countersunk head screws which I also have to get (2*M8*20mm, 1* M8 40mm) But the result looks quite good. Therefore, I have chosen the height so that you can still reach the lamp flaps from the rear light. In addition, the black plastic holder can also be removed if necessary. The back is still glued with foam rubber, so that the paint is not scraped on and no vibration noises can occur. I will round off the upper edges of the bulge a bit. The loading edge is glued on top and from the inside with artificial foil from the vehicle advertisement. Actually I am not a friend of semi-finished presentations, but would like to give you an impression.