Hello and I have an Espace 1.9 dci from 2003. I noticed already after the purchase that I had to press the ZV on the chip under the keys of the remote control so that the LED lights up and thus my car also opens or closes. After c.a 2 months the problem came that I read the card 77 times and had to make it out until finally had ignition and started was possible. So I first went from the map Now I drove once to Renau The price was 200 euros for the card, which is supposed to be made extra for each FIN and another 190 euros for learning and programming WGS. The good man from Bob Renault says dry if the car only starts with a held start button or turns the engine the reader is also due again 400 euros. So I cut off there of course and thought they have one at the pan, got into the car then really had to get out 300 times the cart is anspan g, and all of a sudden ZV didn’t go to the card in spite of the LED that lights up. And yes, battery has changed a dozen times. I hope someone can help. The one with the card and the reader I found reading device plastic clip does not press button 2 completely down so the type of Renault knew exactly what was there and wanted to pull me off completely.Stimmt what he said to the keyboards But stop that the ZV can not go with the card with the button in the interior already