Hello to the forum, I am not getting any further with my B3 (Audi 80 Bj. 88 PM-Motor and KAS-Automatik) at the moment. Somehow I am standing completely on the hose and ask for your help. I just recently bought the car and quickly found out that the distance between the wheel and fender to the right and left are not the same. OK, the car was not really expensive, but just. At first I thought it was a track error, but after the setting it only came out what I initially thought was a wheel offset between right and left of 11 mm. I have now changed for safety both lateral handlebars and both supporting joints with the success that optically everything is again with – bad – old. But from below there is no frame delay visible. The U protection and everything, nothing points to an accident. Can one align the aggregate as such or are the holes only intended for one position of the assembly? Thanks in advance Heiko