Hi guys, I have problems with the Barracuda rims of my Audi A8 BJ 2003. And that was the vehicle from the last Thursday morning until the following Friday evening with a vehicle conditioner. There I completely cleaned the vehicle, carried out leather care and had paint polish all over it. When I picked up the vehicle from there last week, I was totally thrilled: the complete paint flashed and shone in the sun like a new car. Inside the vehicle also saw how new a Today, at work, a colleague said: “Tell me, do you know that your four rims are covered with paint?” I first thought about how the paint goes off. So I went down to the vehicle and almost hit me: On all four rims the paint is spacious. Before I brought the vehicle to the vehicle conditioner, it was definitely not like that. I even have a photo from the wheel at the rear left, so from just before. You can see, when you zoom in, that all i n order is with the rim. Unfortunately, the previous photo is shot sideways, because at the time I actually photographed the carrosserie because of what else, but the rim is also randomly on the photo. There, despite the bad angle of view with zoom, you can see that everything was fine with the rim. Here are some previous/after photos: Before rim back right: Click me afterwards rim back right: Click me After rim front right: Click me The car was mainly there because of the car series polish, which is why I noticed it only today. Can that be that they built shit while cleaning it? How can this come about? Is it possible that the car was not the same as the car, because I was always happy with the rims and because I didn’t bring the vehicle to the vehicle.