Yesterday I successfully put my fog glasses through yellow and wanted to tell you how I did it. So far it was always not possible until I bought new Hella glasses in yellow for 40 euros and when there is the loose it has to go. Actually it is quite simple, you just need a little patience something suitable for helical and acetone. The story with in the oven and then disconnect does not work. I took the wide screwdriver from a pocket knife to helical it on a short side between case and glass and carefully turned it on, always a small bit more until at some point the glass was released from the case. Now I have only put something in the gap that remains open and always a little acetone between case and glass dripped let a little effect and by easy turning with the screwdriver let the acetone make its work. The stick is always more and then you can work in the circle around the whole glass and then a little glue scraping out and a new las stick on it. It’s not easy to put it on the wrong side and then it’s not easy to make the trouble to put it on another glass.