Hey guys, my Cooper S was reassembled after chain damage and 2 Krummen valves. The engine is a Cooper S R56 with N14B16 machine. The engine is: – revised cylinder head (same part number as mine) – control chain set – oil + filter – spark plugs – and some seals – new battery The car does not want to start. If you press the clutch and then press the SSA button, everything lights up and goes out again. The starter has only 1.8 V But if you bridge the starter, it has the ideals of tension. We checked the fuses and the relays, but everything looked fine and was put right. I also can not get into the error memory with my INPA, because the file for Mini is missing in general and the other tool could not find anything. From above and below looked through, everything looked fine, so all cables etc. Has someone got a clue where to go. n could still look?