Hi, I’m probably going to drive two DLS A6(on 2Ohm), as well as an Eton PA5402(on4Ohm) and an Audsion Lrx150.2(4Ohm)… are about 2.4kw rms…. I’m going to install a 120A Lima in the front and move a 50mm2 charging cable to the rear. There’s also a separation relay installed, so that the system only gets power from the batteries that are installed in the rear. I was thinking about two Exide X-treme with 70AH and 530A each…. Then I wanted to switch 6 Alfatec 1F Powercaps in parallel and install them. Or would it be more useful to switch 3 Exide X-treme with 50AH and 360A parallel and do without the powercaps?? Cable path from batteries to power amplifier max. 30cm Mfg Olaf