Good day, I have already read a lot about import of German cars from the USA and was already looking for a Porsche Boxster all the time, until I imported it. Most people have written here that there are no differences, because they are German vehicles. Fortunately I imported a Porsche, which is actually just as built as the German Porsche. A friend of mine imported an Audi A4 year 2007 2.0T with a front damage. You would now be think that these are also driving around here in Germany and they are all being built together here in Europe. Unfortunately you are wrong there. Due to the front damage the wire harness was damaged and some plugs were pulled off. As a result, on a scrap yard the same Audi found with the same engine and removed the wire harness part there. When he brought the thing home, his workshop noticed that the wire harness is quite different and that it does not fit into the vehicle. D a he could not help either, he found at mobile. de such a US Audi with the 2.0T engine from 2006 and drove 300km to compare the wire harness with his. Suburb turned out that the Audi had another wire harness. The plug from the engine control unit had more cables than his, although the vehicle was almost identical with his (same engine, same equipment). Has any of you already had experiences in this direction For interest I asked my friend if they had a problem like this before. The master told me that they had a customer with an Audi A6 from the USA, where the steering pump was broken. When they took the vehicle apart, the pump was connected as a whole system with some ECUs and parts. Unfortunately I didn’t know about it, only the master told me that he lifted his arms at the end and the customer the F was connected. ahrzeug picked up because they couldn’t help in, because they couldn’t find this whole system in Audi’s spare parts program. Look forward to your contributions and experiences, because I wanted to import a pass, but now don’t know what to do.