Good morning forum, I have a little problem with the H7 LEDs from C6. I ordered them, infected them and they went on and off in seconds, almost like a slow flickering. That’s why I contacted the seller and he means I need the decoder that I have to clamp between H7 LED and vehicle plug. Order decoder, plug in. On the driver side the LED works perfectly, it does not flash and lights up as it should. However, on the right side the LED goes still on and off (with decoder, however, in a different rhythm than without decoder) Have the LED + decoder from the left side then installed to the right, still flickers. Then the right to the left, runs wonderfully. Then left + right only the decoder changed, LED to the right still flickers, left still runs as it should. By changing the LEDs and the decoders work. But why does the LED not run on the right side? drive a CLK 200 bj 2004 Greetings Yavuz Addendum to OO–II–OO: Addendum/Answer to further below: “. . . so I came to your name (Yavuzffm) and my thoughts at “ffm” on “Frankfurt/Main” . . . but let me help you directly from a car electrician in Turkey . . . 😉 ” and my nickname does not imply where vehicles are driven regularly by me 😉