Hello, I have a problem with my Peugeot Speedfight 2 50 AC scooter. First of all how it got to the problem. I unfortunately had a piston eater because the oil pump did not work properly. It was an Airsal Sport 70ccm set installed. I bought the scooter with this setup used. The scooter ran perfectly with the setup, so I thought I would buy another Airsal cylinder. I then decided for the T6 Tech Piston 69,7ccm because it applied a little more power can be considered the 70cc sport. Now I installed the piston and it jumped right after the 2 times kicking. So I let the scooter run for about 15 minutes. When I wanted to turn a round with the new cylinder, it did not come from the place. So I gave a short full throttle and it rolled only about 10 cm and stopped again. So my problem is that the scooter with the new piston does not come from the place. What can this be? After all, it ran m I have no experience with scooter tuning as it is my first scooter. I hope you can help me. Here’s the link to my nine cylinder: https://www.racing-planet.de/…uer-peugeot-standing-ac-p-100530-1.html