Hi guys, because I don’t move my car very often, because I don’t commute to work or anything, it often stands a few days until I drive it again. I also have a passive driving style. That cost me a lot, because the brakes from the old car eventually had “Riefen” or something and I had to replace them. Now I have a new car and at least changed my driving style, that I take care to get into the iron from time to time to keep the brakes blank. Unfortunately, i d in the test time apparently not enough on the road and there were the brakes baked (after about 1 week standing), then got rid of each other in a jerky way and since then I have the feeling that they can no longer be completely free braked. Now I’m pretty scared that already called again form or similar. Now to the question: Can I do something about it myself to examine the situation 1) To improve ? 2) ? So my idea is to take down the wheels and possibly rust on the disc Can I also check the pads? So I imagine it similar to the brake pads of my MTB, which I like to take out and grind them off if they do not run well. (clear, are other dimensions) Is this generally conceivable or absolute nonsense? Due to my last rides with proper braking, the “brake feeling” is unfortunately not as good as at first. To the age of the brakes: about 1.5 years with very little brake insert (just from time to time extra g Elats to get down flight rust, otherwise I like to let roll out and drive forward) Thank you for your advice! 🙂 Greetings ben PS: Yes, I used the search function and no, none of the topics have answered my questions this way