Hello again… I have activated the VZE with my car with MIB2 and Standardnavi via the “Car Scanner” app and now have some questions about the display behavior. Scenario 1: Digital cockpit in “Classic” display with Navicard. Navimode also on the multimedia display. Target guidance is not active. Speed limitation small in the upper area of the DC and at the top right of the MM. In case of overtaking prohibition only speed limitation in the DC and MM. See picture 1. I place Navicard on MM Display speed limitation and overtaking prohibition on the left edge are displayed above each other. Scenario 2: DC in one of the three freely configurable modes with traffic sign detection. Navimode also on the multimedia display. Target guidance is not active. Speed limitation in the “main area” of the DC and at the top right of the MM. In case of overtaking prohibition the overtaking prohibition sign in the DC appears next to the speed limitation and in the MM overlap both on the top right. Image 2. Overtaking prohibition is almost not recognizable.