Hello, I replaced the oil pump 6 edge at a VW Tiguan 2.0 TDI, 2008 year, Motor CBAB, and installed the oil pump in the compensation shaft to check the wear of the 6 edge. As far as possible. Next week I get the new 6 edge and a assembly nothing stands in the way. However, I am already thinking about how to start the engine correctly to build up the oil pressure because after I had removed the oil pump the lubricating channel above the pump ran empty. In the nett I find unfortunately no conclusive answers and even on Tiguande.com where the workshop manual of the Tiguan is published I can not find an entry to the engine oil pressure build up. However, there has to be an instruction from VW so that one does not destroy something at the same time? mfg Niels