Good day dear motor-talk friends. I recently bought a long standing China scooter (see description). The scooter ran 4000 km and stands relatively well there. Yesterday I completely disassembled the carburettor and cleaned the carburettor, besides today I changed the fuel filter and the spark plug. So far so good. Now I wanted to start the scooter, whereby I think it is normal when the tank was empty and the carburettor also that it has to cycle a bit until all After waiting for the usual time, I helped with the brake cleaner and it stayed on for probably 5 seconds afterwards, but I don’t know if it was on the brake cleaner or that’s normal. As soon as I pulled on the gas tap he didn’t go on. Now I looked at everything again and found out that the fuel runs out at the bottom of the carburettor. (gasses leaking see picture 1 ). Another thing I noticed is that a hose is filled with fuel. r from the intake bridge to the air filter will lose fluid. (See picture 2). Now I don’t know what else I can do to get the scooter to run and wonder if all this has to do with the 2 mentioned problems. I am happy about any feedback.