MOTOR-TALK

Author: 00c12f

  • After car wash visible again slurry

    Hello together!! I recently polished my car (black metallic) and then waxed with Meguiars NXT Tech Wax. Everything wonderful. You didn’t see any holograms or streaks! Now I washed my car again (handwash with Meguiars wash glove and detergent) and then dried off (with Meguiars microfibre cloths). And now you see such streaks when the light falls on it. Before the laundry they were not to be seen!!! What am I doing wrong?? I can’t always grow the car back after the laundry so that these streaks are gone again. Thank you for your tips!!!

  • Are these articles recommended?

    Hello friends, I decided for a long search and research for the two articles of LiquiMoly. I do not know if they are good but because these are very cheap I will try them out. Can still use the premium items. At Amazon there are some reviews, well… There are also articles about these products if you use Google. Liqui Moly 1535 paint cleaner, 600 ml and here: Liqui Moly 1534 Polishing & wax, 600 ml Here: Thanks now for your suggestions and tips.

  • Many questions about accessories for exenter grinding machine!

    If I want to buy a new eccentric polisher, I would like to buy a Kestrel DAS-6, which costs 115€ (+shipment). Regardless of which polisher it will be afterwards, I need an overview of the actual costs associated with the purchase of such a machine, i.e. I need information about the required or recommended accessories: The DAS-6 e.g. comes with a 155 mm polisher. Should one also treat a second, smaller or even larger one? Which pads belong to the standard repertoire in terms of hardness/use? I want to clean the paint with the machine, i.e. free from Swirls and possibly also some deeper scratches or bird burns and polish in afterwards on high gloss. The wax (Collinite 476) I apply by hand to and off. How big should the pads be? A little larger or smaller than the used polisher diameter? How much money should be invested in the pads? Richen 08/15 pads for 5€/Pad, or like to get some more of them.

  • A few questions about machine polish

    Hello guys, I bought something like this a year ago:http://www.ebay.de/…/290885017632?… But never used before. These are loud hoods, unfortunately there is nowhere to be taken for what. You have to stick away everything possible, roof rails, plastic parts etc. Do you only polish large and easily accessible surfaces with the excenter or really everything? Are there many places where you can only go badly….!? I have from Meguires the step 1-3. I should only use that with the hand or? What should I use with the excenter best? Have a BMW in sparkling graphite metallic. Lacquer is in good condition, never polished. You can see just in direct sun these streaks from the washing system. Would be very grateful for some advice! Greetings Felix

  • Water inlet at the window rubbers/sealings

    Hello, we have since June a Logan MCV 1.6 16 V in the Laureate equipment, at the subsequent pit installation back I noticed now that water was in the doors, although not very much, but it was clearly more than condensation water. I then looked at the other doors and it was the same drama with all four, there was water in it everywhere. I then let water run down the window quite normally and looked at the whole from the inside through the removed pit hole and the water ran down and down the whole inside door again. What bothered me the most was that the water was dripping directly onto the wires running in the door. The water runs into the opening between the first and the second seal, which are present at each of the windows, this opening is too large for my taste viiiiiel (for comparison: in my Gulf IV the seal is not really going right up to the window – without intervening rooms). Therefore now my question: That can not be normal, that the window seals simply run off the water ́resistance ́, but rather the condensions in the inside?

  • How to get rid of smoke

    I’m about to get a “new” car. Since I know the owner I know that he smokes in the car. Good ok cleaning is done anyway that’s made out with him. But since my current car was also a smoker car I know that this pleasant scent doesn’t last long. But can you do nothing about it? There must be something. Has anyone experienced???

  • Cars now also at Lidl – Leasing from 89 Euro

    Leasing now also offers cars. A Fiat 500 from 89 euros at 48 months. Full service including insurance for another 69 euros as well as winter tyres for 6 euros per month. Will this be the worthy successor for the 1&1 action and much more exciting: have customers learned from the mistakes?

  • Steel rims Dacia Stepway II

    Hi looking for my winter tires steel rims. Drive the Stepway II tire size 205 55 16 The rim 6J16 et37 At Dacia /Renault costs a “only” 105 €. Isn’t that cheaper?

  • Dacia Logan MCV (2013 – new) Brochure / Pricelist

    Here are the links to the brochure & the price list of the new Logan MCV:http://…enault-autohaus-schulze.de/…/…EU_Broshre_01.04.2013.pdfhttp://…enault-autohaus-schulze.de/…/…_Price list_01.04.2013.pdf Orderable since 01.04.2013!

  • Dacia Duster Facelift 2013/2014 – it will be even more attractive

    Hello! In the new car picture I read that the Duster gets a facelift and that gets the brand face in this train. Find the pictures great, the Duster gets even more beautiful. I always liked the Duster, but I didn’t like the front so far with the strange radiator grille and the rough-looking headlights. Now I find the really chic: http://www.google.de/imgres?… Edit: Unfortunately this picture doesn’t quite correspond to the picture in Auto Bild… The right picture can now be found in the next post. And pictures from the interior:http://www.google.de/imgres?… Greeting Micha