Hello, I have asked myself at autohaus24.de for an ix55. They currently offer the vehicle to 21,20 discount as an order driver. Business operator requirement. Privately you get the 17,5 %.My question: Does someone already have experience with the company, if yes, which one? Probably belongs to Sixt and to AutoBild. Handling, mail and phone call was very competent and friendly. Delivery time was promised me 12 weeks. The ix55 would then be delivered to a Sixt place in my vicinity. Thus the ix55 Premium (no reimport!) with sliding roof and F20BT would come to € 39,896.44 I would be pleased about answers and experiences. Greeting, hallovolker
Author: 00c12f
-
Urgently, my Phaeton(in repair) is now completely deep …
Hello all, my Phaeton is in repair, with a noble screwdriver (Ferrari, Masserati, etc.) in good hands so. The car is at the moment completely deep sunk, over a period of one and a half years. In order not to strain the air bellows and other parts over the measures, I have to get it up somehow. Since parts of the electrical system are still jammed, i can not let it pump up again with VCDS without greater effort. I have tried, at the moment VCDS does not recognize any control unit. This worked before the repair. Who can give me tips? Can I use a direct control of the compressor, which causes high pumping, or is there the control unit against it, even if the whole electrical system is jammed at the moment. Thank you for any targeted information. Best greetings from the Black Forest!
-
Radio key – Memory key
Hello Good morning dear Phaeton Forum, I have a little time today before I have to go to the late shift, and thought about making a few settings on my Phaeton. As described in the title, I wanted to assign my radio key to a memory key. Have driver seat, steering wheel and mirror set and set the setup to Memory key 1. After that, however, as described in the picture, tries to assign the key without success? I see the correct key recognized in the infotainment, but nothing changes in the vehicle settings when I unlock as described and open the door? With a duck on button 1 on the seat, everything goes into position. Is there a trick to learn which is not described in the guide? MfG. Kuci
-
(Cleaning) Fuel additives vs Premium fuels from 100 octane
Hello, I wonder how exactly (especially cleaning) additives change the fuel or add it to the fuel and if they might have the same effect as Aral Ultimate 102? I had got the LIQUI MOLY Pro-Line petrol system cleaner and the LIQUI MOLY Pro-Line direct injection cleaner to test. Amazingly, both additives have almost the same ingredients. In my opinion, when driving, I notice a similar effect as if I was refueling V-Power Racing or Ultimate 102. I wonder if these cleaning additives simply increase the oct number in the petrol, which one says above all to have a cleaner combustion and cleaning. Or differently, does it bring what to combine the injection cleaner with Ultimate 102? Would I be happy if someone has an answer. Greetings 🙂
-
New wheel screws for winter wheels (steel rims)
Hello! I have had my steel rims for the winter bikes of my Volvo V70I (2.4 Diesel) shine this year and have them re-coiled. Now they look new again and not so gammelig anymore But now I still have the old wheel screws, which are still completely rusty and gammelig. Question: If I want to replace them now, against something more chic new screws, what should I pay attention to? Should I just turn out a screw, measure the thread and its length and go to the search where there is such a thing, or can someone tell me an online dealer, where I can order the screws. Furthermore, with the two front wheels also lack this round cap in the middle of the wheel. Where can I get something like that? Thanks and VG godewind
-
Tilt lever, towing lever and cup plunger
Good day dear community, I have an interview tomorrow and I was told I should inform about towing levers etc.. I would have a question that I don’t find on the internet. Where is the towing lever or the cup plunger used instead of the towing lever? If I researched something about the towing lever I noticed that it is every time about motorcycles. Now I would like to know if you actually only find towing levers in motorcycles, and if yes why or if there are also normal cars with the towing lever system. Possibly, but not so important if it is not so easy to answer, someone could explain to me why sometimes the towing lever is used and not the cup plunger or towing lever or where else just the towing lever instead of the two towing levers. Where are the differences here? Lg Ophidias
-
Delivery time XC60
Hello together, this is my first post here in the forum. I would like to thank you for the countless, great reports here in the forum, which confirmed me in my decision to say goodbye to my Audi. So my XC60, ordered in the KW1 2011(Drive, color white, R-Design, Business-Packet Pro, Comfort-Packet, Winter-Packet Pro, parking aid front and rear, AHK removable, side window from B-pillar darkened, daytime running light, winter tire Cratus 235/60 R18, summer tire Talitha 8×20 diamond cut/dark gray, Heico Chiptuning) should be handed over according to my week (KW13) according to this week. At first KW18 was called as delivery date, was then corrected later on KW13. Said. Last Friday double card, proxy and personal card did not happen to hand over to the car and now it should be done on Friday. Today I get a call that delays the delivery by 2 weeks? I am now doing so? normal? Did I ask you a question? Did I have a good idea?
-
Decommissioning Alfa Romeo 147
Hello dear motor talk community! I, as a simple and ignorant proud owner of an Alfa Romeo 147 – 1.6 TS – year 2003 have the following problem at present: I bought the car in 2006 and according to the previous owner, were installed in the purchase special suspension springs of Eibach i. V. with an LED turn signal strip. Both are also registered in the registration certificate. Now I would like to upgrade the car to standard springs for comfort reasons and have the additional LED turn signal bars removed. Furthermore, I noticed that the minimum distance of 11 cm between the road cover and fixed coros series parts (it is about two screws) in the front area of the car is no longer complied with. Could there be problems with the height of the factory front turn signals with the return with the serial springs? These are already very deep installed or can I not with the installation of serial springs the demanded height of 35 cm (distance road cover to the factory turn signal) again with the back construction with serial springs? It asks me if the front turn signal was not too deep.
-
Huge problem with the chassis and the Tüv
Moin and Hello all together, maybe someone can give me here a tip on my “loved” V40 BJ 2013 D2. I bought the car a year ago with a gapless history… but probably not like that… Unfortunately a private purchase. I had an inspection done last week and both track rod heads should be renewed. Then the car should be over the tuv. Then the shock: Grober lack suspension / spring not proven all the admissibility (EM). The next shock, I look under the car, 2 track rod heads calculated, one replaced, interior / pollen filter calculated and looks like it was the first. But well, the chassis should be the subject here. The tuv examiner has scratched on the springs and underneath was blue color. Springs are black but nothing can be read on it. The vehicle has a height to the upper edge of the antenna 1420mm as indicated by the factory on just underground. But the vehicle also looks visually not really lower now. The only thing that I drive with 18 inch rims. The biggest thing I’m sorry about is the original is to say it’s still a lot of the original fit.
-
Thank you and question
Hello, have been following the forum for some time now and still have to be active. First of all the obligatory 😉 Presentation : Heisse Manfred, have problems to find suitable cars and thus “hanged” at Volvo (tja – the height makes possible). Meanwhile convinced of the brand and therefore now changed from my V70/1 to S80. So much for it… First of all thanks for the constructive contributions and suggestions – helped me with my “old” often. But have still a KLEINE question (please don’t stone – I know the topic was more often in the forum and I also read almost everything) – topic standing heating – what can I program (after I was in Holland…) how? My pure functionality. Would be grateful for a short description…!!! Greets