Halli hello All on the other hand Well I’m also new here and have already asked a question. I drive a 5l Chevy engine with 600 Ede carburetor. Unfortunately I had to find out now that it is set a bit to fat. I already have the one or other instruction through however lack the knowledge about these carburetors. It is spoken of that one or other adjustment screw has to be turned in and out again. But now unfortunately the question for me which screws are the g ? I find 2 set screws on the front so the side when you stand in front of the car. Are these two said screws or do I find them elsewhere ? And the question there is a manual or companion book for these parts ? And if so someone has something and can send me a copy or something ? Thanks already to the many helping hands . Greetings and a nice week still your Oddy
Author: 00c12f
-
OLDSMOTOR CAPRICE 87 STATION
moin…. has someone n olds engine for 87 station caprice??? a functional one? is a 200 4r gearbox in it… so far had 307 olds engine… which engines can I pack in there without big changes? and how much higher would the consumption at nem (402 405? no idea how big the nu was..but olds..and 190 instead of the previous 150ps) increases the consumption there noticeably??? adapts the there at all? adapt there sons still other gm motors to the gearbox?? will no tuningcremp I can’t get the old lady to shoot over my heart…..that’s why transplant….or try to save what’s to be saved… especially because I’ve only had the car since sept and I’ve driven a couple of weeks when it comes up…because it’s already gone up 100km after m purchase..and it’s already been completely overhauled…
-
Ducati Diavel Purchase / Questions
Hello everyone! In the last days/months I have been busy buying a motorcycle and have come back to the Diavel again and again. Since the weather also increases the urge on motorcycle riding I now want to go to action. In addition I wanted to know from the Ducati community whether the Diavel still has any “children’s diseases” or the like that could stop me from buying and should switch to another model. The 2 motorcycles, which on my “desirable list” I don’t want to start a discussion about the advantages and disadvantages of a Ducati over a BMW, but just know about experiences with the Diavel. Still to my person: I am male, 48 years old, living in Switzerland and have been without a motorcycle for several years. Purpose of use would be primarily pleasure, i.e. is not needed for the daily work path. Thanks now already for reviews. Greetings from the Alpine Republic, Pete7
-
Ducati 848 evo 2011 Maintenance
Hello together I bought 04/11 an 848 Evo, with which I am also very satisfied. So nu to my problem,or question. I knew the maintenance and inspection at the Duc ́s is not quite cheap. Only I have the feeling that my dealer bites me over the ear, because I do not know so well. I had made the first inspection right after 1000 km. There were oil changes and lubricants changed. for over 300€!? Ever, in December 2012, I placed it at the dealer’s, since I had my e Garage in winter. I said that he should check everything (i.e. small inspection) if everything is still in order (tires, brakes, liquids etc.) because of stamp and guarantee. Now I got the bill. The timing belt was changed, oil changes (already!?) and smallnesses were made. For this 6 hours were calculated. For almost 500€ I have to say that are only 4500 km down, so between last oil change and this was driven just 3000 km. I h thought that the inspections would have become cheaper due to less work and longer intervals. So my question, are these works justified, and also the price? Thank you very much Beautiful Christmas
-
Ducati Monster s2r 800 as a beginner motorcycle
Hello guys, as the topic already says I have to get a monster s2r before me. I made my driving license class A limited last year and am now looking for a reasonable motorcycle. I would like the s2r 800 very much from the optics / battery. I don’t like the new monsters 696/796/1100 now sooo good….with the 796/1100 I can still be friends (arm swing) but they are anyway too expensive. Well to my questions…. I would have so u m the 5,500 Euro available and wanted to get me a s2r for it. The s4r are probably quite expensive in the maintenance/service I heard. With the smaller 2-valve you drive probably still much cheaper…? The main question is now: Would you advise me to a s2r or something else? What must you pay attention to except check booklet/service (ventile, timing belts etc.). Are there special vulnerabilities? Is there a critical mileage where you prefer to say from there fingers away!? Or do you say you prefer to get away from Ducati and prefer a brand other than entry? As I said I’m a beginner and don’t have much idea Thanks already.
-
2008er 848 suitable for touring??
Hello, where the weather is a bit nicer today, a 08er 848 test. I’m pretty excited about it and seriously think about whether I’m thinking about it. Unfortunately, I was only allowed to drive half an hour and wonder if you can do a little bigger tour with it, or if the Duc is only suitable for injection tours. Are there maybe also bags that don’t bite with the ingenious look? Here’s the link to the bike: http://suche.mobile.de/…/173502197.html?… I is the price ok? There is still TÜV, tires, battery new. In addition, other footrests, rear turn signal, ESD, handlebars, clutch and brake levers are installed. Can you possibly find out how far the brake covers are already down??
-
Can Ducati Sport Classic license plate leave in front of the rear wheel and spray protection?
Hello community, I would like to buy a new motorcycle soon, I would have thought of the beautiful Ducati Sport Classic!http://www.abload.de/thumb/2006-ducati-1000-sporwsk75.jpg However, since the oversized exhaust and first and foremost the plate holder with spray protection are incredibly disruptive, I wanted to remodel the Ducati about like this (marks hang in the bottom, remove splash protection and smaller exhaust)http://www.abload.de/thumb/01_jsjokt3.jpg htt p://www.abload.de/thumb/00_jsoijpu.jpg Now to my questions: 1. Can I even hang the license plate so far down here in Germany? At least it is visible! But is that allowed? 2. Can I drive around in Germany without spray protection at all? There are many who do this, especially the Harley drivers, so that you can see the thick rear wheel. But can I remove the spray protection without any problems and can I get through the Tüv with it? I have different opinions g listen, some say, “No, you can’t drive without splash protection, even if you come through the tuv with it, you could have smeared one there, so it’s punishable despite registration.” And the others say, “Of course you can drive without splash protection, if you have a friend at the tuv, you get it so registered, then the policemen can’t do anything afterwards. Registered and finished”. So what’s right now? 3. I would love to have a little bit of a little bit of a little bit of a little bit of fun. An alternative would be the Zard exhaust! http://www.ducati.kaemna.de/pic/tuning//jrgenstappert1000.jpg However, I don’t like the upper rear silencer. Is it also in the design that both pipes end only in the lower rear silencer? Just like on this picture:http://www.ducati.ms/…/…fighter-blk-streetfighter-stage-5-copy.jpg Or are there other similar alternatives? I would like to thank you in advance for your answers 🙂 Best regards
-
Peugeot / Hercules Speedrake ask…
Hello to each other, I am recently proud owner of a ́1995 scooter ́s – the above mentioned used bought. Unfortunately the condition is more than gruesome, some fairing parts, actually almost all have flaws in the form of scratchers and ab.- as well as broken out holders and noses…. No matter, this is only optical, what is worse are the technical problems. First I took forever to get the front disc brake back functional, a screw from the balance container r was broken off and the other loose, the container empty and nothing except air in the system… So far again good, or usable again, but now I can’t get any further; the scooter has a separate lubrication, so with petrol tank and seperate oil tank. Only that the scooter has been refueled with mixture for a long time since the hose goes empty from the oil tank, I lack the nipple or whatever between the hose and the oil pump. Can someone please tell me where I have the nipple and also only the My nearby Peugeot representative just wants to sell me a complete new oil pump, or a big new motorcycle… That can’t work, can it??? My previous owner had already worn out a nipple (maybe a disease?) and bought himself a new one, only the company unfortunately doesn’t give it anymore. Then the part is just too slow for me, I mean the previous owner has a 70 ́ger o o the 80 ́ger head is installed and at that time also a sports exhaust. However, this is broken and stored somewhere where it is currently not findable. However, there should still be more going on, right? So first, how and how can I recognize as a Nob what kind of head has the box? Then how and where will it be throttled, what can you do about it? I have already got a Malossi Tuning CDi, but somehow it does not get better from the stain. ine or others a few tips for me, I thank you already in advance!!! Oh and before here the moral apostles go right on the baricadas, I do not do anything illegal if I do the box tune or better a little faster, which is not even registered – I have the only for blowing on the company shop and in locked places…
-
Charge battery with power station
Hello dear motor-talk-community, the winter is at the door and the annual problem of a cityr with rental apartment without garage is approaching. The good R1100RT has to be wintered. Now I have no space with power socket at my disposal this year. So I can not recharge the battery in the spring. Overbridge or expand before is unfortunately not possible for me, because you have to disassemble the whole motorcycle with this model to get to the battery. My I dee: I charge the battery in spring with a portable power station – connected to the on-board socket. Now the question of the electronic muffle to the community: Is this possible? What do I have to pay attention to? 1000 thanks and many greetings Muhackl
-
“NOS” at DT 50 😉
Moin, moin. Ride a DT 50 MX ( 70ccm, 20mm Del` Orto+ASS and Mushroom, Gianelli, bla bla bla) I made a kind of “NOS” ! I drilled a hole in the ASS, glued in a hose (50cm) and chased in various Srays like for example brake cleaner, ice spray or start pilot. So start pilot was best! 5th gear medium speed range then full throttle and pure with the shit !!! Is like a kick in the ass 😉 goes fucking awesome off . The problem isr only that the wear is not This is because the risk of the bearings and the cylinder wall running dry is high. Question: How can I get a future lubrication, maybe a little castor oil with pure bubbles?