Author: 00c12f

  • Investment in 96’s 850’s? Ideas for cruise control?

    Hello together A while ago, the official Volvowekstätte advised me not to even make an oil change and to look for replacement. Too big are the necessary investments. Since then, I have also travelled over in the V70III Forum and look around. But the 850 was a super car so far and I would like to follow this track further. I have already successfully treated the licking steering gear (ev only temporarily?) with LecWec. Now I was with an independent Specialists for older Volvos. I would have to expect about 2500 Euros (in Switzerland) to prepare him for the test. Also included would be the change of timing belts, WaPu (the old one is over 10j old) and a flushing of the machine. What do you mean? Is this worth for a twenty-year car (850 Kombi with 20V gasoline) with 330 Tkm? I have to say that I don’t drive 10Tkm a year anymore. So there won’t be too many of them over the next few years. As before, he would also have to take part in long holiday trips reliably. And then something else: the cruise control only works sporadically. When it goes, the control via the buttons in the turn signal lever works without any problems. But usually nothing happens if you want to use it. There is no difference according to outside temperature. I have tried to adjust the pedal switches already. So Zpfen joined pedal pulled out. No effect. (Which of the two switches is Do you have any ideas what it might be? I miss this part hard on long rides? Thank you for your help! Gruss Bno

  • Which number is relevant for the steering gear?

    With my first truck (280000 kilometers) the steering gear has suddenly become leaky, in the garage there was a small puddle under the car in the morning. Which number on the white sign is now relevant to find a suitable used part? At the top is P9140421, the lower one starts with TB and is otherwise not recognizable. Has anyone had any good experiences with LecWec? Thank you in advance! Marcus

  • In the engine compartment breed it and Qwalt easily

    Hello I just wanted to go I have noticed that in the engine room it was easy Qwalt where I opened it and between the engine and battery there you can look well down and have seen it behind the engine Qwalt and Zücht what can be that. Workshop couldn’t find that and they said that’s just the water pump … My question what if it doesn’t go water pump anymore what happens because MFG BEnny

  • Temperature display

    Yesterday I was on my way with my moose and was surprised that after about 3 km the temperature display did not make any movement. Also the heating, which usually starts after a short time, warmed only sparingly. After about 6Km the display jumped at once in middle position and everything was normal again. Today everything behaved as usual. Could this be an early sign of a coming defect?

  • Production errors causing paint problems

    Hello together, drive a Phaeton model 2006 and have only problems with the paint. So far it has been painted four times including new doors and tailgate. The last time he was even driven to Dresden in the glass manufactory. Although everything is on cull, but damn annoying. As a plant two sides from the added court TPI, in which is precisely listed, what this is for a production error, what measures have to be taken and how the culant is regulated. Can also gladly all S the TPI.

  • Phaeton 3.2 V6, automatic cannot be switched, remains in level P

    Hello and good evening together I have the following problem it’s about a 3.2 liter v6 automatic it doesn’t switch when it stands on p for parking then it hangs there firmly the magnet switch is not addressed when I press the brake And I can’t get to the abs control unit even with vcds it’s simply not reachable. In the display in the tacho he also always tells me brake errors stop and visit the workshop. Abs module was completely replaced and still the same error. It lights up on the switchboard also do not operate the brake. Yes for further information please simply write what is missing. Lg chris

  • Air conditioners reset necessary?

    Hello municipality, I have the following problem. With my Phaeton 3.0 TDI, Bj 2008,GP 1, Sunday was changed due to a leak of the capacitor, refrigerants filled up and the error memory read / quenched. Air conditioning ran until this morning also wall-free. Then in the afternoon the surprise, vehicle was heated up and air conditioning also jumped on (ventilation full pull). After about 4 minutes the ventilation subsided and there was no more cooling power. After a short shopping stop, the air conditioning system started again after restarting the engine (good cooling power) and then switched off again after a few minutes. Once again, the engine was turned off, briefly maintained and restarted, air conditioning was running again. What about the cuckoo can that be? ???? Has anyone had a similar phenomenon or can help me? Can the air conditioning system be reset manually and without error-reading device? If yes, how does it work? Greeting Torsten

  • USB adapter connected to SC 802

    Greetings, wanted to report how brilliant it is to be able to keep the original radio and still not to do without MP3 music. And that without losses like an adapter cassette or Fm transmitter. I have the SC 802 in my V70. Because of the optics, the sound and the quality of the radio I wanted to keep this, and still can play more than just cassettes. Of course this is easy with adapter cassettes and Fm transmitters, but first of all this always looks modest and z I bought a USB and AUX adapter last week. From YATOUR, for just 49,-€. And it is really the hammer. It is connected directly to the CD changer input and transmits the MP3 files to the radio without any losses. To the adapter can be connected a USB stick, an SD card or a third device (mobile phone, MP3 player etc.).With the third device of course again losses arise. Therefore USB Stick and SD Card are the first choice, which they are probably anyway. The adapter has a metal housing and is just as big as a cigarette box. And the best, thanks to the software, which is always designed for the jewalige radio, it can be easily controlled via the interface of the original Radiuos. So no extra power on or similar. It is simply recognized as CD changer and the files as CD ́s. Volume control, next tracks etc. everything about radio After switching off, he also remembers where he was stopped and plays exactly on the spot when he switched on again. I installed him on the “deck” in the glove compartment. So you don’t see any cables and he disappears completely, is not in the way and you still get comfortable. So for all those who don’t want to miss MP3 ́s and still want to keep the sucked original radio, and want to see no cables or transmitters, get your USB adapter! In d his senses, enjoy the sun!

  • 850 TDI, handbrake problem

    The handbrake of my ship’s thisel is still getting ready for me. It doesn’t slow down for a long time. Even if I put it firmly on, there’s hardly any braking effect. My workshop has already been there several times. Everything has been changed in the meantime. At the beginning, after a few weeks, the same thing goes on again. Strangely enough, it slows down in between with no apparent reason. Shortly tightened, and the car is fixed. Then a few kilometers further and again the old lenders. and an idea where I could look for the mistake. It’s kind of annoying, even though I don’t need it often.

  • Pick up box cable for High/Low Converter

    Hello guys, I’m new here in the forum and a week ago I got a Phaeton 3.2 V6 with EZ at the end of 2003 and 179 Tsd km. Before I drove a “DICKEN” Chrysler 300 C Touring …. a magnificent copy, 22 inches, low, louder, bulliger … well had a lot of fun with it, ride now more solid 😉 The “NEUE DICKE” has full equipment such as KeylessGo, digital sound system, massage seats and all the other advantages and I’m very pleased with it …. but I need a BASS i m Auto! I’ve been reading through here for a long time and have already received good tips for the DICKEN related to Mulitmedia . Like the digital media player, with which I can now hear MP3 … But now on the topic. I want to install a subwoofer, wires from the battery to the external amplifier is not a topic, is everything freely accessible. But so that I get a signal for my high/low adapter I need a signal from the bass boxes in the vehicle interior which I use current thieves. I tried to get out the left fuse box, because behind it the digital amplifier hides itself from the DICKEN, but that seems impossible. The thick cable harness over the fuse box, with the “many colorful cables” are clearly the cables for the boxes. I then dismantled the left panel in the trunk and see here, the cable strand can be “edited” well here. Here I could easily tap the cable …. but of 12 boxes the verba ut are, are only 4 bass boxes out of the side doors. Maybe someone has an idea what color one of the 4 bass boxes has? Would also tap directly from the interior or from the door, but the door panels have no nerve and there are just too many switches on it. Now I have seen here http://www.ta-group.at/phaeton/images/ssp273_d3.pdf on page 76 Indicator 8 (speaker) that behind the B column panel the cables of the boxes are laid. Is it possible the B- Pillars “simple” to jump off!? Maybe someone else has a better tip!? It must be the bass boxes because I think that over this ALWAYS a signal is running, which I rather exclude with the middle and tweeters .. Thank you in advance