MOTOR-TALK

Author: 00c12f

  • Rearview camera I’m confused

    Hi you love Ehm I try to explain it uncomplicated. How exactly do I connect the camera to ? Have thought so Camera has a minus and plus pole (requires 12v) The video cable has this yellow chinch connection as well as a red cable (beid side) The car radio has a reservation cable in the wire harness which detects if e.g. the backward gear is inserted. (There as I understand are also 12 v voltage.) Now camera rear mount mass look for point .. the red cables both twist together and turn together d at the front connect the other end of the red cable to the lapel. Will my bill open or will it run into the void ? Below is a picture fals it is helpful Thank you

  • Gutmann Mega Macs 55

    Hello, would you need some help with Mega Macs 55… Have an older Mega Macs 55 Year of manufacture 2002 and Software Stand 32. I bought the tester a while ago. Now I would like to update the software via Gutmann. But with older devices an update was no longer possible and you had to send in the Macs and then something was changed on the hardware. Does anyone know about you? Have already with the people of Gutmann phone However, the seller of the device had told me that the tester had been upgraded once. However, this was not done by Gutmann (Gutmann Siegel on the back) but the Gutmen did not want to give me any information about what had to be changed during an upgrade so that an update to software 33, 34 or 35 works. They only offered me that I can get through and that I can get through. they are looking for whether the tester has been upgraded. In the conversation, however, it turned out once again that they prefer to push me a new tester etc…. Just want to be sure that they don’t tell me something where not right (tester has not been upgraded, tester can’t be upgraded or similar). Can someone give me information about what needs to be available so that you can play up newer software (hard disk memory, memory, memory, ROM etc.)? Hardware stand according to type label H1.6 and serial number starts with 14… Before that, thank you for your help. MfG spaceballer P.S.: Know me relatively well with PC hardware and DOS etc.. I have already found out the key combination to get into DOS mode… Technical terms no problem…

  • Ordering a Dacia Logan 1,5 Dci Facelift

    Hello first of all to all Dacia drivers here in the forum. Also we have ordered a Dacia Logan.We find the car great because for about 14000 T(eurons) you get from no other manufacturer a car in this size with a reasonable equipment and a proper motorization(the big diesel will become it) We have decided for the reason car because life in Germany has become very expensive and we do not have our previous standard of life because of a completely We all live only a certain time in this world and when I have arrived at the end of my life I don’t want to say that I have lived and suffocated fifty years of it only for car manufacturers.Believe it,life is too precious for such transitory values as luxury cars.

  • Why is not cheap and economical?

    Hello to each other, I have been following the Dacia forum for a long time. And I must confess that I like the Dacia Sandero quite well!! What I noticed in various tests and in your reports, however, is the fact that at least the Dacia gasoline engines are right swallowing woodpeckers. It is already clear to me that one can not expect high-tech engines and motor peripheral parts for the price. But is it not possible that existing potential – even with inexpensive cars – completely au The 1.9 TDI engine from VW is no longer the youngest, yet it consumes very little due to various modifications – especially in the Bluemotion models. Isn’t this also possible with Dacia. Studies for very economical models have been done by Dacia already!! Or do the Dacia models have such a catastrophic CW value? Have you made any modifications to your Dacia`s? More air pressure or light running oils probie rt? I would be interested in your opinions and experiences on the subject.

  • GOLF 7 really a factory repainting?

    Hello dear forum community, I am new here and find your forum really great 🙂 I have the following problem, I have acquired a GOLF 7 BJ 2016 (In reflexsilber metallic) as a former VW factory member vehicle. After I picked up the car, I noticed repainted places on the fixing screws of the bonnet. I then drove to the DEKRA and the examiner found that the car was completely painted on the right, the roof and the bonnet. The roof and the right side partly up to 250 micrometers and the bonnet up to 350 micrometers. When I confronted the VW dealer with this, he assured me that nothing was noted in the vehicle history about repainted pre-damages. He explained to me that the cars are already repainted in the factory, but this is not documented and the bonnet may only have been re-adjusted. My questions to you: -Has VW possibly another “act” about the history wä during production (according to the VW hotline there is no such thing)? If yes, do I have to hire a lawyer to view this file? -Does a VW really leave the factory in such a condition (fixing screws see pictures)? My problem is that if I want to sell the car, don’t want to hide it and I would like to have written confirmation from VW that the car was repainted at the factory. Otherwise it will certainly become more difficult to sell the car later….

  • Time of action Phosphoric acid for rusting steel and GG parts

    Hello, as a deruster or rust converter I got a finished mixture with 85% phoshoric acid. Unfortunately the manufacturer cannot give me any information about the application. It is about a) rusty steel brake discs made of unalloyed or low alloyed St 07 b) rusty grey cast parts from GG20 or GG25 The phoshoric acid solution is quite thin and the parts have sometimes poorly accessible places. Therefore the brushing method is not possible. Is it possible that you have some experience of how long you can leave such parts in the bathroom? Greetings of the car parker

  • ********* Xenon Headlights *********

    Hello I would like to build Xenon headlights on my Mazda 626 GE. Does anyone know if there are any for the 626GE? Greetings

  • RX8 without Xenon… how does it get brighter?

    Hello, since recently as a company car have called Mazda RX8. Unfortunately I was able to put together the nciht myself but have taken over a car already in the “Fundus”. Unfortunately without Xenon. After nem A4 with Xenon and my 2nd car, nem A3 with Xenon, I am a bit disappointed by the light yield. Who has tips like and which pears here can remedy? Thanks Earl

  • Experience with Mazda 5

    who of you already has experience with the still relatively new Mazda 5-Van? I am about to buy a Mazda for the first time and then specifically the Mazda 5 as a family coach (after bad experiences with Opel Vectra B and Audi A3). So, what are your experiences with this model? I am particularly interested in the aspects fuel consumption (we want to buy the 143-hp diesel), family suitability/place, breakdown susceptibility and – if there is someone already experienced – Crash security.

  • 1.9 engine in MX5

    hello erstma wanted to know if the 1.9 16v motor from the mazda 323 fits into a MX-5 NA with 1.6 16v. can someone help me?? in advance alreadyma thank you