Hello together, which winter tire should I take for a Mazda Demio 1.3 46 KW FL? In my desired size 14 inches I can drive only 175/60R14. In the dimension, however, there are only two tires. Pirelli Snowcontrol and another one (unfortunately forgotten). It is more varied with the 165/70R13. Here there are a whole range of tires. It is particularly important to me the characteristics in wet weather. Live with Hannover and there it rains more than that it snows. As a summer tyre Goodyear GT3 (175/60R14) and so far Debica Frigo in winter. From the current ADAC test with good wet results, eigtl is only the Goodyear Ultra Grip 7+ in dimension 165/70R13 available. Many dealers would like to sell me the Sava Eskimo 3. Lt Test did not cut out in the wet area however. Does one know the Sava and if so how is it? Which winter tyres do you drive on the Demio and what experiences h Are you off to work?
Author: 00c12f
-
Engine strength of the MX-5
Hello, I have to buy a used MX-5 NB in the near future. Then I’m just to nem dealer and got me some information. Among other things we came to talk about the engine power. Here the seller said that the 1.9L engine with 140 hp would be hard to control. Especially with wet or split there is no tracking control integrated. I now complain the decision between the 110 hp and the 140hp version. Which would you prefer n.
-
Polishing for insect removal?
Moin together, to my question I have already tried the SuFu and also google, but found nothing really specific to my question. I collected the summer over diligent insects with the bonnet and tried to wash the animals as short as possible (insect remover, high pressure, hand wash). But this does not always work directly after every ride and especially on holiday, i.e. about 1-3 days were already between surcharge and laundry. Now I have of course still (relatively) light The car is 2 years old (about 6 months with me) and the paint condition is still quite ok. Now the question: Can I knead and polish only on the spot? I.e. only the area of the hood and front, in which the burned insects hang… My plan: -Hand wash -Kneten (the front and parts of the bonnet) -Polish by hand ( P-ball with medium and/or hard pad, Mezerna 3000 and/or 2400) Sealing with Dr. Wack A1 Thank you in advance.
-
How often max. his car wash?
Hello together, have a quite new expensive Audi SUV and wanted to ask your opinion how often you should drive through the washing machine maximum? I have such a flat rate with Mr Wash and am unsure how much distance you should have. Exaggerated said: Every day could be rather harmful, or ? Currently I would drive through so every 5-7 days times. Would you like to have your opinion
-
Fly and rim cleaners
Hello together, I could find in the forum some posts on flies, rust etc., but no comments on good and tested cleaners. I have the challenge that even after washing the flies were not removed properly, neither on the bumper nor on the disk. A friend spoke of Würth cleaner in May, a foam. Do you have product suggestions for me? The same applies to the rims. The washing line does not get the rims properly clean, I would like something Thank you. Vg
-
Purchase decision: Colt 1,3 Inform steel grey metallic,
Hello, what do you think of this offer: Colt 1,3 Inform, 5-door, 95 HP, grey metallic, German new car, 0 km with daily registration March. 07. Price: 10500 Euro. I would probably have had enough of the 75 HP engine, but the dealer no longer has a good offer for the 1,1 engine. Beware that the 95 HP engine swallows too much. I’m not sure by moving and professional changes as my driving profile develops. But think it will be a little driving mix (max. 10000km/year) from city and highway. A otherwise: how satisfied are you with your Colts? Are the factory specifications for consumption coming? Is there a long time between Polo and Yaris (both too expensive) and Skoda Fabia (too ugly). Now turn to the Colt (indoor very convincing, test drive with 1.1 engine liked)… Do you think I should? Oh yes: has anyone ever got a bike in with extended rear seats?
-
Ram protection bar L 200/Bj 03/K60
Hello, maybe someone can help me. I have purchased a handle that, despite the seller’s commitment, does NOT fit on my L200 Bj 2003/serial thruster. Anybody knows this handle and can tell me the manufacturer because the type plate is no longer readable. It would bring me a bit further. mfg HPhttp://foto.arcor-online.net/…/1280_3933313639376333.jpg http://foto.arcor-online.net/…/1280_3133396139323438.jpg http://foto.arcor-online.net/…/1280_3731313930376564.jpg
-
golf shot from the tip of the sale
…. what’s going on – too much on top class? from autorevue [url]http://autorevue.at/…/parse.php3?mlay_id=10111&%3Bxmlval_ID_KEY[]=2548&mdoc_id=1027406[/url]