MOTOR-TALK

Author: 00c12f

  • Space Runner Purchase intention!!!!

    Hello guys, I intend to look for a long time for a suitable Fam. carriage to buy a Space Runner GLXI 1.8l. 90 kw/ 122 hp, ABS, AHK, EF, ESD, ZV It is from 8 /94, black met. and still looks quite chic. However, he has already slipped through 5 hands…., but has only run 115,000 km. Hope honest!!! Would like to hear some pro and contra criteria. Running performances…Where rusts he? Repairs at the mileage etc. I read the in the forum and hear that si Is it possible to have this year of construction converted to gas? On Monday I will do a test drive and drive on a stage. Can you give me a few tips and what man should pay attention to. Thank you in advance for every tip and experience. Then I’ll also report if it’s mine! MFG Björn

  • Consumption Carisma 90PS

    Hello guys, Can anyone tell me how much Mitsubishi Carisma consumes with the 1.6l engine and 90hp?? So city and highway. If known, a few data about potential vulnerabilities of these models will be helpful. I plan to buy one of these. Greetings, freak

  • Something happened to me today!!

    Help ! Today I played with the Autodia and since that is the error 18034.P1626 data bus drive missing message from the transmission control unit in the error memory. It shines like a Christmas tree the yellow engine light, which over the warning triangle then Abs and the red flashing brake signal comes after a few meters drive. Before the “playing was ALL OK. Yes the display exhaust Wetkstatt lights up but is also not in the error memory. Please for help and will never play with it. Did I get in there??Even better how do I get out of this sh… again? Fits BG3 74kw Avb switch bj 2005 LG Reini 11

  • Problems with VCDS

    Hello together Heue I picked up my new S3…provisionally I wanted to read out the error memory and encode 2 things. At the AUTOSCAN (VCDS) it has “hanged up” 2 times and there is an error message. After that I installed VCDS again…reading worked out. No errors…TipTop. When “adapting” the start/stop function, the control would bring me if I wanted to change the values to 50, an error –> value inadmissible. Does anyone know why? When I select STG 09 (on-board network) STG access rating -> Function 16 Enter access code 31347 STG adaptation -> Function 10 channel (6) – daytime running light – continuous running light enabled in addition Select stand light value to be active …made…did not tell me VCDS –> measurement block available. Furthermore, VCDS said that it does not know the control unit and I should send the data to RossTech support. Does anyone have advice? Tom

  • problem with VCDS HEX CAN USB interface

    Hello together! I have been having this cable link removed for 3 days because product loss is advertised! – wbf325i, MT-Moderation German version 10.6.4 A small CD with 2 VCDS 10.6.4 English and 11.11.1 German exe file. I first installed version 10.6.4 and also drivers. Cable was immediately recognized by PC. Plugged in at the car, and performed a test. I could also read out this error. But if I want to encode some things on the car (A6 3.0 TDI, bj2005), beko I always use the message: No licensed version. What exactly do I have to do to make everything work? I also installed version 11.11.1 and did the test. But with this version I have to run an update on the cable. I haven’t done this yet. What would happen if I did the update? Would this run with English version 11.11.1 as full version? Can you please help me further. MFG:

  • Grande Punto: Oil consumption problem

    Hello! Just looked at my Grande Punto 1.4 8V with now approx. 23,000 km times for the oil. I was shocked! The oil level was at the lowest point of the rod just so burdened with oil, maybe so 1-2mm!!! So not even in the measuring field was more oil!!!! (And I know how to measure the oil level!!! Was certainly no measurement error!) Last filled up the oil up to max at 16.000, when the car was bought! That means he consumed in 7,000 km so much oil?!?! 1. Why verbr Does the car have so much oil? What defect is there? If I have to know that quickly, because now there is still warranty/guarantee on it. 2. Should I not get some oil at FIAT free of charge if it is a defect? It is a defect consequence damage. I don’t want to pay for the expensive oil at FIAT. 3. Can I still drive with the car to get oil? Or do I have to fetch the oil elsewhere? 4. What damage could have been caused by the fact that I apparently have to I didn’t drive around with such a low stand until today, and why didn’t the car call me?

  • Play & Challenge – The Fiat Group in Film & Television

    Moin, I’m going to pick up an idea from the Mercedes forum at this point. I think this is a nice change and promotes the community’s thoughts and identification with the forum. I’m organizing a small game, here are the rules for this: Films, series (following) and music videos in which cars from the Fiat group can be seen. Here should be mentioned: film, series, series or video, as well as model of the vehicle. For a single viewing he If the first one posts it 1 point, the vehicle plays an important role (so it appears regularly or often) gets the first one to post it 5 points. I think it’s very important … it shouldn’t be used databases in any case. In the case of contested scenes, a screenshot would be desirable (I know this will not be possible for everyone). So … please be honest. If I have time, I can summarize the results on Sundays, otherwise I would ask anyone who achieves it. to add points prophylactically to yourself. Have fun and have a lot of success ! Greeting Kester

  • Dacia constructive criticism

    Hello Dacia driver, I regularly look at the Dacia homepage, I think many drivers do it on the internet (secretly). I like optically somewhat the Sandero, Stepway and the MCV. I plan to buy the MCV in Zukúnft, because the room offer is fantastic for the price and is very modern. As a new car on pretty aluminum rims, why not. But what I don’t like to be honest: the outside doors (the shape) and the complete seals on windows and suitcases raumklappe. Quite cheap to look at standard coatings (in particular the blue), the metallic coatings are however very nice and not worse than with Ford or VW. The image…still…unfortunately. Visually sometimes a slightly cheap appearance, but due to out with cars comparable from the Asian area (e.g. South Korea, Japan etc.). Quite high consumption. But otherwise the car is simply great, believe me many VW, BMW, Mercedes and are envious of you. Of course they never give it to you. I’m talking about drivers of premium brands who drive slightly older cars (i.e. 6 years and older). Now to the positive: quiet and comfortable. Elegant and inconspicuous. Beautiful headlights. 3 years warranty. If it’s a new car or it’s well maintained, a Dacia looks good too.

  • original Sandero 1.2 Eco2 middle armrest installation??

    I just talked to the car dealership, they want to have 80 EUR for the installation of middle armrest, middle armrest costs 102 EUR. How expensive is it to install such a middle armrest. I was told that one still needs a part for 20 EUR to install… the whole would cost me almost 200 EUR??? Does anyone have experience with sow…? Thank you

  • Choosing polishing stroke and support plate size for what?

    Hello, I’m just thinking about taking an Excenter machine with 8mm or with 15mm hub. But I would like to use small ones instead of the large 135er polishing sponges, so that I can get the 10cm to narrow positions. Can I actually do this with a 15er or is the 8er so much more suitable? So a smaller support plate also fits on a 15er hub machine? Or what is the best choice for? Greeting