MOTOR-TALK

Author: 00c12f

  • Capital Motor damage Honda Hornet PC36 CB600F

    Hello dear community, I just wanted to show you a few pictures of my engine damage at yesterday’s exit. Dates about the bike: At the request of the TE removed – twistance/MT-moderation. Then yesterday shortly after a break continued and heard a slight “tickern”. I first thought about a loose plastic covering and looked down briefly (vibration or similar) because it was really not loud. Then out of the place a little bit the gas opened and then the clacking was loud (Pleuelabriss) and after about 3 seconds the hole was in it and the oil + fuel outside 2 holes, one front and one back in the block. Presumably quite strongly, that on the oil supply what did not fit (oil pump possibly because of the eater?). But if the replacement engine there is the old block interest still disassemble. Would you go with the topic sometimes to Honda ? Is already an old bug meanwhile. But that with the mileage I find extremely questionable. Greetings Mutzi

  • Switch charge air coolers in line

    and one more question: if I had the series LLK ́s installed by the 225er and simply build a large LLK dazische, I would have to achieve the maximum cooling power, or is that not so good because of the constant pressure change between pressure tubes and LLK ́s??? So you would save yourself also cumbersome productions of new pressure tubes and just put the new LLK over silicone pipes instead of the connection tube between the LLK ́s (the longer I write about it, the cooler I find the he idea) Greetings NOS

  • Is there any statistics on engine damage?

    Servus! My A4 1.8T 150PS goes away today and a TT with 225 will (hopefully follow) but, the A4 had a motor damage and thus I am a bit preloaded what the topic is about. Have already heard now that the 225ers are more stable than the 180ers. Is that right? Greeting Robbie

  • The Best Exhaust System in the World….

    Hello together… I’m looking for a nice exhaust system. I’ve already got a few infos about Eisenmann ESD level 1, 2, or 3. Unfortunately I don’t know anyone where I can listen to something like this live. What I would like to have a nice dull and sonorous sound. Unfortunately, it’s not so easy with our turbo-babe! So, Eisenmann 1.2 or 3, or rather Remus? Or maybe something else?! If only I want to exchange the ESD, I would like to be in need of it. I saw a 3.2 in the friendly one yesterday. A sound like that wouldn’t be bad…. But unfortunately I miss 2 cylinders for that. What are your experiences, what are you driving for?

  • KWGewinde/Not Deeper..!??!

    meal, I ordered for my tt coupe 165kw winches from kw (variant 1 ). installs the kram and.. the car is not deep enough for me at the back..!!!I can turn down 1 to 2 cm at the front..but the rear is already turned to the maxim..!!and on wedge I have no bock.. the car must have a line..has someone of you nen kw winches…!?there are shorter springs,or how can I get the car deeper in the back..!?have already the 18 inches s wheels and still a lot of air..!!freakness..and for that 1 000 euro..!!!unbelievable..hope someone can help.!!!!!!!!!!!!!!

  • Setpoint breakpoint side blinker

    What kind of cheese is that again? Audi integrates the same white side-blinker into all Audi models from the A2 to the TT to the A8 and the thing is also qualitative brainless. I can’t tell anyone that this should break point on the clip, over which the blinker is held in the sheet, but actually was not designed consciously. if the bulb should be broken, you can also order a new flasher case with me immediately, because without scraping it, get with me it is even without external effect at the end of the week at more than 200 on the BAB simply broken off, so that the blinker hung about 15 cm on the cable out of the kotflügel. a lucky thing that did not happen in the washing system – the thing would have scratched the whole side of me smoothly. thanks audio, for this super trash. and the coolest is: I bought a set of used flasher housings for 7 eur at ebay, since the clips were still there, but in the middle of it I guess I’ll have to glue it in somehow, otherwise I can’t sleep in peace…

  • Once again a helmet question – headache after over an hour 🙁

    Dear Talker , yes, I know – this topic is as old as the forum itself. And I don’t know any more . Therefore I am extremely grateful about knowledge of you old rabbits! ?? I am re-entering, after 17 years yesterday finally picked up my new motorcycle. Previously extensively tested helmets and see there: There was a SCORPION Exo-Tech Evo (in XXL ). Had carried it repeatedly already at home (homeoffice advantage ), since sometimes 10 minutes, since sometimes three quarter hour. Yesterday the motorcycle a After a little more than an hour I thought: “Great cinema, from the gloves to the helmet everything perfectly bought, nothing presses”. I shouldn’t have said. Feels 10 minutes later (that is after about 75 minutes) the helmet on the right head started to press..so this nasty subtle head pressure, as with slightly too tight headphones, which then becomes a simply ultra annoying pain within a few minutes. Now I am a bit ratlo S. Will this change? Will this get better? Will this get worse in the summer? Honestly, I’m also confused about how to find a suitable helmet at all…should I give it back (which I think is extremely bad, because the helmet itself is great)…because how should I find a suitable helmet if even a helmet that feels perfect only shows its “true side” after hours? Very dear greetings & thanks for every input

  • Sportback Pics online

    Here:http://www.audi.com/…/bildgalerie.jsp finally gives the pictures of the Sportback. What do you think about it? The discussion is open LG

  • Rear axle wheel bearings

    Hello, At 120000km a wheel bearing at the rear left side has become loud. Are the wheel bearings at the front side the same? In my opinion, changing each axle would be advisable or does it have a different opinion or view?!? Have you picked this out: https://www.lott.de/…/skf-rad bearing set-ww1844231?… Or should I switch to original? Please give us a short info Your regards:

  • Verdi member advantage of 10% when buying new cars

    Hi, because I’m working at the big magenta company, I came across the fact that you get 10% on new cars via the Verdi union. My Audi dealer only wants to give me 6.5%. Here is the info: http://www.verdi-membersservice.de/site/portal/shop/index.htm MFG Scheiby