Hello, this is a technology thread in which it is not about the extinction of the type approval when using these bulbs. Has anyone already had experience with it? It already starts with the enormous dimensions of the heat sinks of these LED replacement lamps, which are now available in countless versions. Then there is the problem, that with most older moppets the H4 headlight housings also hold as a distributor for electrical plug connections and therefore the heat dissipation eh The network offers different versions of H4 LED for motorcycles. That starts at 40W and then goes up to crazy 100W as LED power and that with a lifetime of 50,000 hours? So I can’t imagine, where the whole waste heat should go with a power consumption between 3.3 and 8.3 amps. Has anyone ever measured this by whether these lamps really take up such a big power? I’m curious about your A. VG.
Author: 00c12f
-
LT 35 2nd generation: Left turn signal on trailer does not work!
Hey dear community! For some time now we have the problem at our company LT 35 of the 2nd generation that the turn signal on the left of the trailer does not work. Additional turn signal module has already been changed, without result! Oddly, however, that the light concerns when I break the module and close the contact switch by hand in this. So there is electricity from the part to the plug socket, so somewhere something has to be wrong from the turn signal lever to the module! Before I break everything up here and find me a wolf, where can I best start, measure or test anything else? Safeguards seem to be I.O! Which would be responsible for this?
-
Crafter Error P0299 Charge pressure control Error and P246E Exhaust gas temperature Sensor 4
Hello, I drive a crafter 2010 with 110000km. 2.5L CECA I have the following errors: P0299 charging pressure control error P246E – exhaust gas temperature sensor sensor 4 To charge pressure error: Every time I accelerate in 4.5.6 gear, it falls into the emergency run after a few seconds. All seal on and around the turbo have been renewed as well as at the cracker. Turbo was delivered for repair. Nothing was found, works perfectly. Charging air cooler also seems to be tight. Can someone tell me what there is s is ? The sensor error is new ?????
-
MAN TGE with 120 kW engine
Hello dear forum, one of you knows a little more about the 120kW diesel in the MAN TGE. Is this a new engine or is there already long-term experience. I am interested in all information about the engine, especially compared to the 130kW engine. I have attached the performance data from the MAN documentary once. https://www.man.eu/…/man_tge_technical_data.pdf
-
Question to the trailer professionals (100 registration)
I quote: (…) 4. Prerequisite (for 100 registration): Mass ratio The maximum permissible mass of the trailer (zG Anh) must not exceed the following value: zG Anh = X x m Pull fz empty with m Pull fz empty = Empty mass Towing vehicle Depending on the technical equipment of the combination, the following values apply to X: Technical equipment of the trailer without hydraulic shock absorbers with brake and hydraulic shock absorbers Caravans Other trailers 0.3 0.8 and 1.0* 1.1 and 1.2* respectively (… For my vehicle combination the factor is 1.1, I only need a few kg to reach it. Question: can the support load in this calculation be added to the unladen mass of the towing vehicle?
-
My house, my car…
I would only have been interested in what the information about the number and brand of the cars at the end have to mean?! Or would I have to write then how many apartments houses cars run on me or in the land register I myself drive a motorcycle suitable here to the forum 11 years old and probably not quite cheap! (for a Swabian!)…
-
K 1300 GT Who has it?
Hello I play to get the K 1300 GT, but want to know from you whether it is as reliable as it was used to by an old BMW, please write your reviews with purchase date, equipment, color and what is more important mileage and defects. MfG Ulli
-
bmw conversion
Hello you love I’m going to Holzkirchen in the summer of 2010 to visit someone I come from Switzerland and know that the conversion in Germany is cheaper than with and someone in the area Holzkirchen to Munich is understanding a good cheap workshop BMW 😉 would be happy to see you soon
-
BMW F800S – Purchase advice/experience
Hello, I’m doing my driver’s license and of course I’m looking for the right motorcycle. Apparently I found a decent, good motorcycle with the BMW F800S. About 40,000 kilometers are down on the machine, the inspection is on (dental belts etc.). What’s your, honest opinion about the machine? The mileage should not cause any problems? Could you please tell me your experience with the machine? Any problems, anything special about what I’m looking for? should be visited? Heating handles, on-board computer, ABS is included. Around 5000 euros are still required for this. LG Daniel
-
Flashed
Hello first of all, I know it doesn’t belong in here 100%, but villeicht can you help me trz :-/ I had made last week vacation in Schleßwig-Holstein. And since I normally drove out of town and drove from a 100th zone on a 70 zone and directly behind the sign they stood. ( Mobile Blizer) I had according to Tache so about 100-105 km/h on it. 2 days later I wanted to go home and I am on the A1 on it, did not see a sign (I think once overlooked) and my navi also showed unlimited, then I drove between 140-160 and suddenly it flashed…(fixed blizzard) So I don’t know exactly how fast I was allowed to drive there, either 100,120 or 130… And my GREAT problem is now that I’ve had my driver’s license for a year and 3 months. so I’m still in the probation period. :/ What do you think will come up with me? MfG jens