Hello, I have already looked through everything – also here – and found out that the statements about this are usually a few years ago. During the research I found that the current statements are only from import companies located in “D”. Is the “self-import” no longer worthwhile or burdened with too big problems? Who has recently self-imported and how do you get to the DK car sellers and their prices. One hears that the personal commitment is worthwhile sol l, why I would be interested in real statements and experiences. Greetings from the “Pfennigfouchser” ….or do you say “Centfouchser?”
Author: 00c12f
-
experience standklima new actros ?
Hello together, someone has experience with the original standing climate in Actros 4, are known as problems, who is satisfied or dissatisfied.. we have now some running and at most is the memory after 4h empty, the display of the level indicates how it is funny.. in the work at the collection you have said it keeps up to 11h.. (probably in winter) would please me infos.. thank you.. greetings
-
MAN TGL stops while driving
Hello guys, I have here a curious error which no one has found so far, therefore I turn to the professionals here in the forum. Vehicle MAN TGL 12.250 Euro 5 EEV First registration 01/13 The driver has already reported several times that he is suddenly slowed down during the ride on the highway or even the engine runs out briefly. The cruise control switches off immediately. Sometimes at this moment the ESP warning light turns on in yellow. Ignition remains switched on, Tacho also shows no voltage interruption or ignition from signal. It could also be that it is not the engine, the moment is so short that you can not determine it the driver thinks. We have been to MAN several times, as this is a guarantee, besides the Fzg. has a Comfort-Super maintenance contract (full service). No one has found the error so far. We have now closed it to our workshop tester and read the following errors, which cannot be deleted. CAN Bus: Raddre hzahlsensor VA Signal implausible. However, if I measure the sensors directly in a standstill and during the ride I have normal measured values. I am curious if someone had this error before or the MAN professionals have an idea. The driver of course always asks me what it could be. Thanks for your answers.
-
Control chain wear and lax at my BMW S 1000 RR
Hello, I drive a BMW S 1000 RR, built in 2011, I had used it with 19 thousand km, currently it has 27,000 km on the speedometer. I had to have the steering chain replaced already at a mileage of approx. 21,000 km due to wear. This occurred to me extremely early, because I actually assumed a significantly longer durability. My questions: Is it normal that the steering chain wears away so early on in this model? What could be possible causes for this (z In addition, I have for some time a light, but clearly audible clacker, which worries me: It occurs from about 3,000 rpm and remains at higher speeds, but is then harder to perceive. The sound disappears as soon as I pull the clutch. In idle mode it is also to be heard when I turn the engine higher. But not as if I drive Important to know: The chain tensioner was changed recently, so I am not the driver. whether the sound could be related to it or whether there is another cause (e.g. clutch or gearbox). Has any of you had similar experiences or an idea of what it might be?
-
BMW RT 100, Built 88
Hello my father drives a BMW RT 100 and for some time the watch has been defective in the cockpit. The remaining electronics work perfectly. Does anyone know what that can be?, or how I get it to run again. Or does someone know how expensive a new watch is? Still the note, it is an analog clock. Thank you for your answers Greeting, Phidschey
-
Frog King
Hi Leuts Some of you I have promised pictures of my just acquired 964s. It is time to fulfill this promise on a day like today (National Day in Switzerland). @speedster964 Hi Jens, hope you can give me a feedback on the question asked by PN … was no joke, the question, the oil temperature remained today (at 28° outside temperature and on overland roads) always in the lowest temperature third. Print ok, stock ok. Thanks in the vora us! A wonderful day wishes with sunny salut Alfan
-
3000 euros for a premium brand
Hi, looking for a car for approx. 3000 Euro. I need a petrol engine. Transmission doesn’t matter. But would prefer for the price manual transmission to save fuel. The old automatic transmissions consume a lot or? I rarely drive the highway. Drive more than 60 percent highway and rest of town. Annual driving performance would be about 8000km. would like to fetch vw, audi, bmw or mercedes. At mobile.de and autoscout24.de I find e46(6-cylinder),e39, a4 b6(2.0) for this price. Price imaginable that you can get good or usable copies? bmw 4 cylinders and vw/audi control chain motors I want to avoid because of the control chain problems. but looking for from 100 ps performance. should I avoid e39 or e46 facelift models because of the takata airbags too?
-
1er vs. A3 vs. CLA vs. ??? – Up to 22.5k €
Hey together! As I’m about to drop off my company car (A3 etron), I have to buy my own car. First I loved a Mazda 3, but I don’t like the automatic transmission. Now it has to be a good used one. Here a few details about my driving behaviour and my “want to the car, maybe you still have good objections: I would also be open for other cars/models. Unfortunately I find the Hyundai i30 very ugly from the inside, therefore falls off The current table guide is:https://suche.mobile.de/vehicles/details.html?id=297912357 Best regards
-
GLC accessories wheels Different press-in depths
Good day together, I’m writing you for the first time today because I have a little doubt. I bought a used GLC250d, where winter complete wheels were already sold with. But now I have to find out the following: My GLC250d from 2018 with the approval number: e1*2001/116*0480*28 Has installed for the winter the following rims: Rial Bavaro 8J H2 235/60 R18 ET35 In the attached extract of the ABE from Rial rims are released for the GLC. Here is e1*2001/116*0480*16. (here ge ge ge. This means that these wheels can be mounted according to this ABE. Here is the link to the ABE:https://www.rial.de/…/BAVARO%20(BR)/BR808_8,0x18/BR808_5x112_ET35_B7/00361075_BR808_5x112_ET35_B7_66,6_6a_KBA49237.pdf Now, however, both the wheel tyre combination on the Mercedes side for my GLC and the EG agree that the GLC has to be driven with ET38 at 18 inches. In my opinion, the wheel tyre combination on the side of Mercedes has to be driven with ET38. I have attached a photo of the EC conformity and the extract from the wheel tyre combination. How do I now proceed with these wheels? Can I drive these wheels and if so, do they have to be registered then? Or we have a proof that I can drive these rims easily. The previous owner has driven these rims for years. I very much hope that you will be able to contact me with these rims. m topic can give a boost! Thank you in advance and greetings! Niklas
-
1.6 SIDI Where is the buying argument?
I have now looked at various tests and reports on the new 1.6 SIDI. But somehow it makes me feel that the engine doesn’t make any economic sense for the buyer at all. I am speaking very precisely about the fact that it should “fuel” Super Plus. The consumption, exhaust and elasticities look quite ok at first, but we are talking here about a price difference of about 10 cents per litre at Super to Super Plus and even 15-20 cents for E10 to Super Pl So let’s take an Astra with 56l tank and the average ride with 15000 KM mileage per year. Thus, only the fuel results in higher operating costs of around 250€ per year compared to a current EcoTec. At 20,000 KM even the 2.0 CDTI may have almost amortized without counting it right now. Of course, according to the operating instructions, it can also be refuelled with super. But who guarantees me that the engine then after 4 years not the first n has engine damage? According to experience reports, the consumption of a Cascada with normal super is combined at around 9 liters. But that doesn’t really bother me now. So where is the argument for a SIDI?