The discounter mentioned in the title offers its 20 volt battery tool all year round over the internet (as opposed to the “Other” discounter with 16V devices). That’s why I gave the Lidl tool priority. Does anyone have experience with this tool and can report about it? Of course I know that this tool can’t meet the highest demands. But if a swap battery of the renowned manufacturer is as expensive as a complete device from the discounter you make With me, battery devices rather die the “non-use death”. Not because I’m lazy, maybe I have too many in parallel in operation. Greetings
Author: 00c12f
-
Torque wrench only for oil change.
Hello, I’m looking for a torque wrench for oil change (oil drain screw). I guess I won’t start with the key much more. Unfortunately, I always wear the stupid screw too tight. What do you think of these two? https://amzn.eu/d/1377388https://amzn.eu/d/2aEf8xb [affiliate links away from MT]
-
Radmontierhilfe gesucht …
Hello and good day, I carry out the bike change in the private frame for several vehicles within the family at least twice a year. A lift in the private workshop is available. Unfortunately I do not get younger and I have problems with the back. In particular the lifting of a large wheel on the wheel hub while inserting the wheel screws at the same time causes problems for me. For this reason I am looking for a kind of wheel mounting aid. I find offers to professional device This is far too expensive for private self-drivers. I also found a few inexpensive equipments, but I have no idea if they are good. In price terms, I imagine a little less than 200 euros if this is realistic.I would like to ask you kindly for hints, experiences, recommendations. Thank you in advance!
-
50L 10bar Compressor to impact wrench, lubrication?
Hello, today have bought an oil-lubricated 50L compresdor with 10bar and it is to be used in the future with a impact screw. Air hose has inside diameter 9mm. I know myself with compressed air only semitoll. Is it enough if I lubricate in the impact screw before each use with sewing machine oil in the air connection, or do I need an oiler (or wue?) in the line. If that is enough, is enough sewing machine oil, or should I take something else? Thanks in the before off for all tips! Greetings
-
Noise differences between 2.2 TID and 2.2 TID?
Moin, Moin! Drive for a few days my 2.2 TID Arc (show car / 22 tkm Built. 6.04) and have previously driven a 9-3 Coupe (Bj. 4.02/ from 0 to 127 tkm). Was and am satisfied with the Maschiene totaly BUT in the Coupe I NEVER heard the turbocharger (?) whistles. In the Sport-Limo. you hear this whistling in the lower and middle speed range. Is this normaly? Find the engine otherwise perfect… Greeting to all SAAB drivers – and especially to those with the 2.2 solder engine 😉 Dirk
-
Warehouse damage or not? Kymco Hipster
My brother drove yesterday and heard “wire loss” and a clacker. Coupling pulled and right on. The sound can be heard right at the end of the video.Video Now I have removed the engine and started to feel slow. After apparently not getting off the cylinder, I took off the clutch cover. There I found 2 screws lying down.They belong to this part (what should it be??)? Now the question really comes up, further disassemble or test… Bzw how to test…? Almost thought of assembly and then turning at the crankshaft with air pressure screwdriver. The sound should then be gone… Shouldn’t it be enough?
-
Honda Dax purchase advice ( also looking for a )
I wanted to ask you Dax drivers, how fast is the ( original ) Dax ST70 driving? And what should be paid attention to when buying? I already had a Dax ST 50 G, but this model is too slow for me. I found a Dax ST 70 on the Internet, which was upgraded with 85ccm set and now runs around the 100 -110 km/h. Can you leave the entry ( year 1973 )? !!! Thanks already in advance !!! Who has a Honda Dax ST 50 or ST 70 ( would I prefer ) to sell, can they I like to offer ( best with pictures ). My e-mail is: [email protected]
-
Which oil for Hercules MK2
I have a 30-year-old Hercules MK2 and have been driving it for several years. I’ve been using a synthetic oil for all these years, but I’ve been having problems with it for a few days, so it doesn’t go on anymore or after a short time. Now a neighbor who knows something like that is probably all full of slag from my synthetic oil or something. He meant best to clean everything up and then to mix a mineral oil in the fuel instead of He’s right, or I can use the synthetic one.
-
50ccm moped or save on motorcycle
hello community I’m new here and have a question I apologize already in advance for my spelling,set construction and if this question has already been asked. and thank you to those who can read through this carefully and possibly help me. I’m just doing the bf17 license and am thinking of getting a 2 wheel since I’m fully on something like that. now to my problem: I don’t have so much money and ask myself now, should I get the money for a 50ccm m oped use (which I can drive with bf17) or rather wait until I am 17 1/2 and make the motorcycle driver’s license a2. or do without both and get a car with 18 (which I exclude because I can’t afford it.) to the 50cc moped I have already made a picture of the offered on mobile.de and don’t necessarily want what is needed because most of these are treacherous or what you call it. and I hardly have any idea what I have to pay attention to when buying a moped. deshal b I tend to something more recent (e.g. rieju freejump mrt cross ,where I don’t know if I’m looking after it with just under 1.90 ) to the motorcycle it is worth 18 at all and it makes sense to use the motorcycle as a main means of movement (because of snow, rain etc ) and how much I have to expect (motorcycle, protective clothing, driving license ) I guess there is a lot coming together already. thank you for reading through and I hope you can think after head-breaking an answer say un d i apologize many times fals this topic question has already been asked somewhere Mfg tooyotal
-
Which 50ccm scooter to buy?
My sister needs a scooter to go on a daily trip, which had previously had such a china scrap Chopperstyle NEW that was constantly broken… So now only proven like Aprilia, Piaggio etc Price Max 1000 I picked 2 out of the regionhttp://kleinanzeigen.ebay.de/…/288179588-305-353?ref=search I like best because I was very satisfied with my Aprilia Ditech (know that this is not a ditech). Also, it would be possible here to dethrottle quickly. http://kle inanzeigen.ebay.de/…/282987719-305-352?ref=search Woch wie neu , howevers ist Die Sitzbank porös, man denschein neuer Angebung und ne neue Batterie kaufen, zusätzlich kein helmfach… edit: Ich gesucht noch 2 lesenhttp://kleinanzeigen.ebay.de/ 291530313-305-4853?ref=wlhttp://kleinzeigen.ebay.de/ 286768809-305-369?ref=wl Of course this would be offered here:http://www.ebay.de/…/370871915558?… what I had installed at my time. h rides a few months and I probably take over the scooter afterwards, as a fun equipment nice or ? With the Malossi the Ditech ran 110 km/h with killer suit … What do you mean ?