MOTOR-TALK

Author: 00c12f

  • SV650 2020 Coupling problems

    Servus together, I have been driving the new SV650 (built in 2020) since October 2020 and now have just under 7000 km on it. Today I wanted to ride a lap relaxed than I noticed when I switched it down, especially the second gear a little ticked (greater resistance than usual on the clutch fuss and clearly louder). Sometimes he didn’t go in at all. In the stand it also came before that I didn’t come in neutral from the second or from the first in neutral. The higher gears were I then drove a little bit to test it out and then found out that the SV is starting fast by itself about 5 km/h with pulled clutch in the first gear. Now on the way home this stronger resistance was also when switching down the higher gears. Switching up usually felt normal. Have now the clutch lever in suspicion. He felt already more play and had taken off the cover (picture) and does not know if the completely norm al is there someone maybe has experience or can tell me what this is all about and what this is all about. Be very careful with my SV… Greetings, Manu picture of clutch levers in unloaded condition. So neither attracted nor pushed forward.

  • Suzuki GsxR-1000 K5

    Hello, good day! I have a problem and I can’t find a solution for that, and I’ve been in possession of a K5 Yoshimura Edition since the latest edition that has just down 11500 km. Now I’ve read in many articles that there is a cat in the K5/K6 I always thought there is a pipe going through from front to back. Now my question is, where should it be installed because I also have the special edition Yoshimura Trioval on it. The best would be picture so I know exactly what I’m looking for n has to write all toasters as well but I don’t even have such a thing because I was not aware until today that she has a cat at all. A second question still asks me how or what can you do to make the pretty one still a bit bangs that would interest me burningly. So I’m looking forward to the answer thank you already in advance MFG Phillip

  • Interior fan , air conditioning without electricity Obd without data

    Woman comes home and says fan in the interior does not go and the air conditioning. So check fuses. inside 2 fuses exchanged, from socket and fan. ,no success. Then the thermo plug tested in the fan, is ok. Then the fuses checked in the engine compartment, all ok. That’s a crossfox. Now I wanted to read the car as before but it hangs the tester at 14230 on half of the measurement. Do I have more fuses? Behind the Dashboard on the top left are still relays but no fuses. Can’t ask anyone here am in the northeast of Brazil.

  • Full engine conversion VW Fox

    Hello, I’ve been looking for a company that’s been installing a new, more powerful engine in my VW Fox 5Z for a few weeks now. The VW Fox was my first car that I bought and I wouldn’t like to give it away. I’ve already adapted it visually to my requirements for this reason (complete spoiling outside, leather sports seats with massage and seating inside, entertainment system etc…). These changes make sure that the car is already visually pleasing to me, jedo The car is equipped with the 55 hp machine, which (you will know) is not suitable for long motorway rides. Now I would like to install a powerful engine in my VW Fox (about 150 hp). I am very tight in my job and can therefore not deal with the procurement and assignment of this conversion. That means I need a contact person who gets the car from me, around the parts procurement, I know that this conversion will be very expensive, but I am attached to my car. As my own limit I have set myself about 13,000 €, if the conversion would cost more, I think I would buy a whole new car. Vll knows one of you a company that would make such a conversion, if nothing else remains to me to give my VW Fox and buy me a new car. Greeting jucKi

  • You must have been to blame

    I just thought that hit me. Was with the aunt Louise and wanted to get me some small things and drive there to the parking lot, but then,,,, yes, exactly but then … no parking space free Oo prope full the people have parked in second row both pkw and möppis. That was definitely you … all together ^^ lg and so well looks like a good start to the season patrick achso edit: I then drove on ^^

  • Misignition and lack of power at lower speeds VNT50A

    Hello, I recently bought a VN 1500 Bj 1990. Nice part, has been subtly rebuilt. However, now there is a problem, in the lower speed range it does not pull and if you let it roll, then it blows neatly. Therefore, I would explain to the bad suit that it stood for a very long time. In addition, the cracks of the previous owner were changed rather badly than quite, that the empty Louis accessories bags fit. Now however to my question: Could the misfires on the lack of backlogs due to the empty bags? And can also the lack of torque be due to it or do I have to “free” the car first? (the last 5 years maybe 50km per year moved) And finally, how could I create backlogs, I hate to install an original system. (TÜV doesn’t matter) And before I forget, I’ve already read the thread to the bad start of a 98er UN, but this is another problem as it looks and helps me no further. I am grateful for every constructive contribution! Greetings, Timbo

  • (Re-) Beginner – Buy ZR7S, is offer ok and pay attention to what?

    Hello. After 10 years no motorcycle anymore I play with the idea to get back on the two-wheeler. I looked on the market without any obligation what there is. I immediately noticed a machine: Kawa ZR7S, 03/2001, Blaumet., approx. 12,000km, 2. Hd, so far very well maintained and no maintenance stump. Stands at the dealer and should cost 2.500.-€ (incl. new TÜV and inspection). Actually I wanted to spend for the re-entry max. 2.000.-€. If I compare something d Is there something special about the model that should be taken into account?

  • Chainset change meaningful?

    Hello together, I’m new in the biker scene, i.e. I bought my first bike a little over 3 months ago (Kawa ER5, year 97, a little over 50,000 km). Although I wanted to save until I can afford something “ordinary”, but it was at least a bargain financially. Now to my actual question. The seller said the chain set had been changed at 45,000 km. Well, optically it looks anything but 5000 km running line, no matter…. Now to my question you would be in running should I choose a new chain set (doesn’t cost the world) which manufacturer would you recommend? Thank you for your help. Crimi

  • What punishment will be expected without label lighting?

    Hi. Have my license plate of my R6 moved up about 6-7cm (directly below the lower edge of the rear lights.To do this I had to remove the identification light and remove the lower unused rest (with retro-reflector) of the plastic holder for the license plate. What happens if the police noticed?What punishment is to be expected?

  • Mounting ox eyes – Drilling handlebars for cable laying?

    Moin moin, the following: I am about to mount handlebar end turn signal on my slurry. Now the question arises – where with the cables? I don’t get to drill a hole in there, which would have to be allowed, because handlebar turn signal with the correct E designation (for vehicles before year ’85 also without additional turn signal at the back, the slurry is year ’83 *juhu*), also should be allowed. I think it is possible to remember that it is allowed to drill the handlebar between the clamps. h but not, and I’m not sure about that either. Who knows more? Greetings Dominik