In about 2 weeks I will most likely be allowed to fall on a rather “lived” Golf IV. In view of the merciless paint condition, the m.E. would be an absolutely suitable object for the use of the microfiber pads on my exenter machine. Of course, I will drive test passes to find the most efficient polish. The following products are available to me: Menzerna PG1000 Menzerna PF2200 Menzerna PF2500 Menzerna SF4000 For an efficient removal would come from the Of course, only PG1000 and PF2200 in question. I haven’t found anything for the use of the PG1000, with microfiber pads. Since, in parallel worlds, the basic suitability of polishes on MF pads is also mentioned (as far as I remember, really only mentioned…) I already wonder if the PG is possibly less suitable. So far, I also assumed this with regard to the FG400, which I have briefly thought about. Then I read a test by Celsi, in which the FG400 ric Perhaps I am under an unfounded restraint at the PG1000? In principle, until I read Celsi’s report, it was so for me that the polishing components of the FG400 dissolve too quickly and therefore, are less suitable for MF-Pads. Not only because, but also because the 1000s works a little “softer” I think now to apply them. Is there any experience? Both concrete answers to the combination in the headline, as well as fundamental considerations would interest me.
Author: 00c12f
-
BLACKED in the rehearsal year!
moin moin, I asked a question and that’s why I was flashed yesterday evening, the distance where it goes from 70 to 50 then in a criss-cross traffic and then it’s straight again, but is inside and I normally drive also net so fast, I dreamed yesterday somehow and did not look at the tacho. on jhedenfall was 5km/h inside place and suddenly I totally scared because of the red flash. knew garnet what was going on and looked on tacho -> 72km/h showed me di digitally and I just thought MIST you are way too fast! I had also stopped net sifort afterwards, because I had to get clear what just happened and had the car roll out for the first time. nja definitely I am inside probbezeit and was on the road with 72km/h. now my question: the car is a mercedes benz e220 and listens to my father. I already talked to my readers about it-> can be peasieren that you get flashed etc., are net angry or something, but I am j I’m definitely interested in whether the tacho with the mercedes really is true? or the 1-2km/h shows too much as I read it that way? and the tolerance is 3km/h or? means if I was 22 too fast it’s already 3 off? then I would be “only” at 19km/h and would not get a point or a re-training.. or can I still take off 1-2km/h because of the tacho from the benz? make me really so much gen mfg hope you can help me!
-
Let me teach you “needed radio keys,” is that possible?
Hello together, Would you like to ask if you can get a used radio remote control from E*ay at the Omega B Facelift at Opel? And if so, what’s such a fun with Opel? I know that you can let VW learn used keys at VW…but I don’t know how it looks at Opel… That’s why I’m asking you thanks Greeting Ricky
-
Time allocation!!!!
HALLO HABE DA AN A PROBLEM TO KNABBERN, A driver has 2 times a week the possibility to make 10 hours (pure driving time) Now the following: You drive 1 hour and 10 min and stand 15 min.(Pause) then drives 2 hours and then makes 30 min. break = (After 3 hours and 10 min. driving time so 45 min. break) Now starts the next 4.5 hour block right? I will ask for an answer further not to cause unnecessary confusion. Please just answer with yes or no !!!!!! Danke
-
Mercedes buys 80,000 engines at Iveco! 😛
…the headline says everything about it… I can’t tell you any sources, will probably never give you any! (in 10 years’ time.) according to my source, they also asked not to hang it on the big bell! it is also “muttered” at mercedes about it that some should even be in the sprinter. but mainly they should run in the mitsubishi. this is mostly/exclusively about the F1A or F1C engines from’m daily.
-
Purchase advice for an Alfa Romeo Giulietta 2,0 JTDM
Hello, after a long time back and forth whether it should be a BMW 1 or a Mazda, I finally decided for an Alfa Romeo Giulietta. My budget is at max.15,000€, whereby I would be 13-14,000€ optimal. I would commute 110Km daily (back and forth) to work. My wish would be to drive the car for at least 4-5 years. I have found the following offer and would like to test drive:http://suchen.mobile.de/…/205499357.html?… Wal do you keep from the offer ?. Is the price too high ? . Are there any other known defects with the Giulietta which should be taken care of before the purchase ?. What other costs are to be expected with this driving performance and age in the near future ?. Are workshop visits generally expensive ?. About a short assessment on your part I would be very grateful.
-
Questions about the MiTo, especially the TCT transmission and the 1.4 MultiAir Turbo engine
Buon giorno! I’ve used the search but not found too much about the MiTo. Or I’m too stupid I’m thinking of buying a new MiTo next year in spring. I didn’t want to get any Italian after my FIAT anymore but worse than with my VW. I think the MiTo is very chic. It’s supposed to be the 1.4 with 139 hp and TCT [there’s no other way?] or the QV with 170 hp [there isn’t at the moment]. o Driving fun? I’m not interested in straight bolting on the highway. Does the TCT transmission have any flaws? What about durability? What is the stability of the 1.4 MultiAir? Does the chain or timing belt have? Wechesel interval? And to the MiTo in general: Is there anything that bothers you and you only noticed after the purchase? I once had a car where the radio reception was underground… Other problems and flaws? Ciao e grazie The Gas Warden
-
Sprinter or Daily ?
Hi guys. I want to buy a new van soon was so far for a Sprinter 318 box High long 3.5t.Today I was at Iveco and must admit I was very surprised what there are for differences. I start with +&- Daily pkw registration +++ Sprinter pkw approval — Daily Tempomat Series +++ Sprinter Tempomat Series — Daily trailer load 3.5t +++ (single tire) Sprinter trailer load 2.8-3.0 — Daily Cheaper +++ (don’t know exactly how much) Sprinter Expensive — Dai ly Italian — (processing and material —) Sprinter Made in germany +++++++++ Daily 4 Zil — Sprinter 6 Zil. +++ Daily 3% fin +++ Sprinter 6% Fin —
-
Engine replacement
Hello in the round Have a Volvo 850 bj 1994 2.5 20V engine is flat and is to be replaced. With my old is the flash box installed and he had the switch suction tube. Could get an engine from a 96er with OBD 2 and without switch suction tube… Has anyone had any experience whether this works or whether it becomes problematic? Best regards
-
Where do you get an original new turbocharger?
Hy, now I would like to install a “new” original (Mitsubishi) turbocharger. MFD N0 49189-05200 All who have offered this so far then determined that they can not deliver after all. Do you have a serious source of supply? Thank you